Machine Category : Gear Machines
Sub - Category : Gear Hobber
+ Advance Filter
MAKE
MODEL
GEAR DIA MM from to
MODUL MM from to
Total machines found : 338
Sr. ID Make Model Description YOM Condition Photo Enquire
1 MA27319 Tos Czech FO16 Max. dia of workpiece : 1600 mm,
Max. Modul : 16 mm,
dia of milled wheel : 1600 mm,
Main motor power : 12 kW,
Overall Dimensions : 4260 x 2255 x 3170 mm,
Machine Weight : 18.5 Tons.
Very good condition Photo
2 MA27146 Liebherr L2500 Max. wheel diameter : 2500 mm,
Table diameter : 1800 mm,
Wheel width : 1130 mm,
Module max. : 18,
Hobber length max. : 350 mm,
Table hole : 410 mm,
32 kW,
Weight of the machine ca : 50 to,
Dimensions of the machine : 6500 x 2900 x 4200 mm,
Without telstock,
Gear cutting max.4 meter is possible.
1976 Good Condition Photo
3 MI6067 Stanko-Russia - Dia : 600 mm,
Module : 6,
Complete with change gear set.
Good Condition Photo
4 MI6066 Cugir,Romania FD400 Max. gear diameter 400 mm,
Max. gear module 8,
Axial travel of milling head 300 mm
Main spindle speed range 50-300 rot/min,
Main motor power 7,5 kw,
Vertical working feed range 071-6.3 mm/rev.,
Weight 4500 kg,
Quantity : 2
Good Condition Photo
5 MA27007 Tos Czech FO16 Max. dia of workpiece : 1600 mm,
Max. Modul : 16 mm,
dia of milled wheel : 1600 mm,
Main motor power : 12 kW,
Overall Dimensions : 4260 x 2255 x 3170 mm,
Change gears, tungational head, arbors etc.
Machine Weight : 18.5 Tons.
1961 Good condition,under power Photo
6 MA26955 Pfauter,German P2500 Gear diameter max : 2500 mm,
Gear width : 735 mm,
Module max : 18,
Table diameter : 1900 mm,
Hob head 240 °,
Hob diameter : 290 mm,
Hob length max : 330 mm,
Distance between tool and work piece min/max : 1400 mm,
Hob travel : 300 mm,
RPM 25 - 150,
Total power : 30 kW,
Overall size : 8 x 2,5 x 4 m,
Net weight : 32 t.
Reconditioned in 2007 with new SPS control VIPA STEP 7
and Heidenhain measuring systgem for x/y/z axis,
ABB motor ACS 800,
New electronic gearing for table and hob head (without gears),
Without outer steady.
1961 Reconditioned 2007 Good Condition Photo
7 MI6053 Muir Max. dia of gear : 4750 mm,
Max. height of job : 2500 mm,
Max. weight of job : 20 tons,
Min dia of gear : 400 to 500 mm,
Min no of teeth for 25 module is 20 teeth,
Bed dia : 2600 mm,
Bed bore : 400 mm,
Power : 15 to 20 HP.
Good Condition Photo
8 MI6049 Bombay (Small Machine)
Module : 8 mm,
Dia : 10 mm to 400 mm,
Height : 150 mm.
Good Condition Photo
9 MI6048 WMW Modul (Big Machine)
Module : 16 mm,
Height : 300 mm,
Helical 45° 1000 mm dia,
OD 10 mm - 1300 mm (External),
ID 150 mm - 1300 mm (Internal).
Good Condition Photo
10 MA26907 Kolomna Russia 5A342 Max diameter of workpiece : 2000 mm,
Max modul of wheel, machined by worm hob/disc hob/digit hob : 20/25/30,
Diameter of table : 1800 mm,
Max weight of workpiece - 20000 kg
Spindle rotations : 8..100 rpm,
Power : 20 kW,
Dimensions : 8600 x 4440 x 3800 mm,
Weight : 32040 kg.
1966 Good Condition Photo
11 MA26882 Kolomna Russia 5A342P Max.work piece diameter : 2000 mm,
Max. vertical moving of milling support : 900 mm,
Distance between spindle axis and table : 200...1270 mm,
Distance between spindle axis and table surface : 580...1390 mm,
Table diameter : 1800 mm,
Spindle speed range : 8...125 rpm,
Module : 20 mm,
max. gear teeth angle : 45 degree,
Max. work piece weight : 20000 kg,
Max. diameter of installed worm mills : 300 mm,
max. length of installed worm mills : 500 mm,
Main motor power : 20 kW,
Machine dimensions : 6910 x 4440 x 3700 mm,
Machine weight aap. : 32000 kg
1983 Excellent condition,under power Photo
12 MA26814 Tos Czech FO25 Max module 25, Max diam. of the gear 2500mm, Max diam. of the gear with outboard support 1300mm, Distance between axis of a spindle and camping arbor 80-1630mm, Max diam. of the gear by tangential method 10 grades 2400/800mm, Max diam. of the gear by tangential method 60 grades 500/700mm, Max number of teeth with standard change gears 448, Max face over 1500mm diam. of the gear 800mm, Max face under 1500mm diam. of the gear 750mm, Max hob diam. 340mm, Max hob length 500mm, Revolutions steps 8, Revolution of hob per min 12, 5-63, Table surface diam. 1500mm, The main motor power 14kW. Good Condition Photo
13 MI6029 WMW Modul ZFWZ500x8/I-1 Gear dia : 500 mm,
Modul : 8 mm,
Maximum dia without tail stoke : 800 mm,
Horizontal travel of the hob : 430 mm.
Very good condition Photo
14 MA26806 WMW Modul ZFWZ1500x15 Table dia : 800 mm, Max dia. : 1500 mm, Stroke of hobbing head : 400 mm, Module 15. 1965 Good Condition Photo
15 MA26712 Farrel Sykes12H Normal module : 40 mm,
External diameter : 6200 mm,
The width of the chevron : 1520 mm,
Direct tooth : 760 mm,
Internal : 560 mm,
The height of the axis of the gear over bed : 910 mm,
The height of the axis of the gear over the pit :3550 mm,
Distance between the axes of the greatest : 3780, the least : 254,
Hole in the spindle for fastening : morse 7,
The distance from the face plate,
To lunette greatest : 2900, the least : 2000,
Weight of the work piece maximum : 40 tons,
machine weight : 150 tons.
Good Condition Photo
16 MA26612 Pfauter,German RS3 Mac. gear diameter : 1800 mm,
Module : 15 mm,
Hob diameter X width : 210 x 260 mm,
Hob travel : 150 mm,
Face plate diameter : 970 mm,
29-114 rpm,
Main motor : 21 kW,
Net weight approx : 8500 kg.
Good Condition Photo
17 MA26535 Schiess Sedin Max dia of gear to be hobbed : 8000 mm,
Max module steel : 33,
Max module cast iron : 40,
Max dia of hob : 400 mm,
Max workpiece weight : 60000 kg,
Machine is equipped with control system OMRON driven by servomotors.
1952 / 1983 Good condition,under power Photo
18 MA26528 WMW Modul FCZF03X4 Max. diameter of work piece : 250 mm,
For hobs : 8 mm,
For module mill : 14 mm,
Max. hob diameter : 160 mm,
Max. length : 200 mm,
Taper : MKS,
Speed of hob : 50-400 U/min,
Speed of hob : 10 mm /WU,
Speed of table : 1120 mm/min,
Motor power : 15,2 kw,
Weight of machine : 10000 kg,
Dimensions of machine : 6000 x 3800 x 2600 mm,
Quantity : 4 numbers.
Good Condition Photo
19 MA26218 Tos Czech FO16 Max. diameter of milled wheel with straight teeth : 1600 mm,
Max. work piece weight : 7000 kg,
Clamping table : 1350 mm,
Diameter of arbor work : 80 mm,
Through bore of clamping table : 180 mm,
Max. distance hob spindle to surface of table : 1050 mm,
Min. distance hob spindle to surface of table : 400 mm,
Number of hob spindle speed : 8,
Range of hob spindle speeds : 16-80 rpm,
Number of feeds of hobbing carriage : 36,
Range of vertical feeds per revolution of table : 0.25-6.0,
Number of feeds clamping table :(radial) : 36,
Range of feeds of clamping table per revolution of table : 0.05-1.5,
Axis to axis distance hob spindle to table : 100-1150 mm,
Motor power : 12 kV,
Length, height,width : 4260 x 2255 x 3170 mm,
Weight : 18500 kg,

With universal cutting head,
Tangential cutting head,
Set of change gears,
Arbours,
Mandrils,
Manuals in spanish language,
Table support : 8 unit.
working condition ,under power Photo
20 MI5869 Cugir,Romania FD320 Max. Diameter : 400 mm,
Module : 6 m,
With new compact electrical panel,
Clutch replaced by AC drive.
1976 working condition ,under power Photo
21 MI5866 WMW Niles ,Germany - Max. Diameter : 500 mm,
Module : 5 m,
With mechanical
Good working condition Photo
22 MI5865 WMW ZFW Max diameter : 400 mm,
Module : 5 m,
New panel with plc/servo/him.
1990 Excellent condition,under power Photo
23 MI5864 Cugir,Romania 250 Max. Diameter : 300 mm,
Module : 6,
With Change Gears.
1979 Good condition,under power Photo
24 MI5848 Stanko-Russia 5343 Table diameter : 2800 mm,
Swing : 7500 mm,
Cutter diameter : 370 mm,
Maximum module cut : 55 mm,
With four heads internal, tangential, normal hobbing head, endmill head,
Single indexing and hobbing,
With Z supports and table of : 5300 mm,
With internal hobbing and single indexing attachment,
With double helical gear attachment,
With tangential slide for hobbing,
Endmill attachment,
Accuracy within 0.1 mm,
Hydro clamping of columns,
Hydrostatic table.
1984 Good Condition Photo
25 MA25777 WMW Modul ZFWZ800 x 10 Max working diameter : 800 mm
Max modul : 10 mm,
Table diameter : 690 mm,
Machine dimension : 3720 x 1760 x 2300 mm,
Weight : 8500 kg
Good Condition Photo
26 MA25776 Kolomna Russia 5342 Max gear diameter : 2000 mm,
Max module : 25,
Max hobbing length of : 500 mm,
Table diameter : 1800 mm,
Maximum table load : 10 ton,
Main motor power : 14 kW,
Overall dimension (L x W x H) : 6910 x 2990 x 3462 mm,
Weight of the machine : 31800 kg.
Change gear,
Hob arbor 10 pcs,
Work stand,
Manuals.
1960 Renew 2010/1977 Good Condition Photo
27 MI5841 Tos Czech FO16 gear dia 1600mm, table dia 1350mm, modul 16,load 7 ton, no of grooves 8, no of feeds 36, spindle rotations 16.80 rpm, main motor 15 kw, rapid motor 7,5 kw, weight 21 tons. Good Condition Photo
28 MI5830 Reinecker Table dia : 1800 mm,
Max. dia : 2450 mm,
Module : 25 mm,
Main motor power : 14 kW.
Good Condition Photo
29 MA25645 Kolomna Russia 5A342PF2 Max. diameter gears cut : 2000 mm,
Max. vertical moving of milling support : 900 mm,
Max. module of processed wheel not less) :
Worm mill : 20 mm,
Disk mill : 25 mm,
Manual mill : 30 mm,
Table diameter : 1800 mm,
Max. work piece weight : 20 ton,
Max corner : +/-45 degree,
diameter of installed worm mills : 300 ...500 mm,
Amount of cuting teeth : 10...1800,
Spindle speed : 8...125 rpm,
Electricity : 50 HZ,380 V,
Main motor power : 20 kW,
Overall dimension (LxWxH) : 8600 x 4440 x 3700 mm,
Machine weight : 32040 kg.
1991 Good Condition Photo
30 MA25623 Russian 5A342P Max gear diameter : 2000 mm, Min gear diameter : 200 mm, Minimun teeth number : 20, Maximum module : 25 mm, Maximum table load : 2000 kg, Table diameter : 1800 mm, Main motor power : 15 kW, Overall dimensions L x W x H : 6650 x 2990 x 3460 mm. 1984 Good Condition Photo
31 MA25594 Russian 5A342P Max. diameter gears cut : 2000 mm,,
Max. vertical moving of milling support : 900 mm,
Max. module of processed wheel (not less) :
Worm mill : 20,
Disk mill : 25,
Manual mill : 30,
Table diameter : 1800 mm,
Max work piece weight : 20 ton,
Max. corner +/-45 degree,
diameter of installed worm mills : 3000...500 mm,
Amount of cuting teeth : 10...1800,
Spindle speed : 8...125 rpm,
Electricity : 50 Z, 380 V,
Main motor power : 20 kW,
Overall dimension (LXWXH) : 8600 x 4440 x 3700 mm,
Machine weight : 32040 kg.
Good Condition Photo
32 MA25549 Russian 5330 Max. gear diameter : 3000 mm,
Table diameter : 1150 mm,
Max. modul : 20 mm
Good Condition Photo
33 MA25532 IUG Craiova,Romania FD3600 Max. milling diameter : 3.500 mm;
Min. milling diameter : 650 mm;
Max. vertical travel : 1.000 mm;
Min. no. teeth : 30;
Max. tilt angle of milling head : +- 45 degrees;
Max. weight of workpiece : 25 tons;
Main motor power : 15 kW;
Machine weight : 36 tons;
working condition ,under power Photo
34 MA25508 Liebherr L3200 Max. gear diameter : 3500 mm,
Max. face width : 1500 mm,
Max. pitch module 30 (0.85 D.P.),
with single cut cycle .Differential . Hob shift. Outer tail stock support. Center work support. Overhead sliding tails tock support. Hob centring device. Various arbors. Change gears. Work holding fixtures etc. Coolant/oil separator.Swarf conveyor. Table extension in 2 pieces to cut gears up to 3500 mm diameter having outer supports etc.
(1958) Rebuilt by Liebherr 1978 Good Condition Photo
35 MA25506 Liebherr L3002 Max.. gear diameter : 3000 mm,
Max. face width : 1400 mm,
Max. pitch : 30 Module (0.85 D.P.),
With 2 internal hobbing heads : 2- cut cycle,
Crowning (copying). differential .Tangential feed. Indexing to table. Auto hob shift. Outer tailstock. Centre work support. Various arbors. Change gears. Work holding fixtures etc. Coolant. Swarf conveyor.
1981/82 Good Condition Photo
36 MA25408 Tos Czech FO16 Diameter of workpiece : 1600 mm,
Modul : 16 mm,
Max. diameter of milled wheel : 1600 mm,
Max. milled modul : 16 mm,
Main motor output : 12 kw,
Dimensions l x w x h : 4260 x 2255 x 3170 mm,
Machine weight : 18500 kg.
1974 Good Condition Photo
37 MA25220 WMW Modul ZFWZ1250/3 Max. wheel diameter 1250mm , Gear width 600 mm , Max. module 14 , Min. module 2 , Diameter of hob 240 mm , Table surface area 1020 mm , Turning speed range 28-200 U/min , Feeds - axial 0,28 - 8 mm/min , Feeds - radial 0,1 - 2 mm/min , Feeds - tangential 0,16 - 4 mm/min , Support swivability left/right: +/- 45'' , Electrics - voltage/frequency: 380/50 V/Hz , Total power requirement 25 kW , Weight of the machine ca 16 t , Dimensions of the machine ca 4500 x 2100 x 3300 mm Perfect Condition Photo
38 MA25201 WMW Modul ZFWZ3000x30 The largest diameter of the milled wheel : 3000 mm,
No less milled wheel diameter : 300 mm,
Max. module : 30 mm,
Maximum number of teeth : 480 mm,
The largest milling width : 1000 mm,
Rotary table diameter : 2400 mm,
Maximum weight of workpiece : 30000 kg,
Power : 31.6 kw,
Machine weight : 61030 kg.
1954 Good Condition Photo
39 MA25158 Staehely SH400 Dia of table : 540 mm,
Module : 8 mm,
Stroke : 300 mm,
Axial displacement : 300 mm,
Full set change gear.
1974 Good Condition Photo
40 MA25140 Tos Czech FO16 gear dia 1600mm, table dia 1350mm, modul 16,load 7 ton, no of grooves 8, no of feeds 36, spindle rotations 16.80 rpm, main motor 15 kw, rapid motor 7,5 kw, weight 21 tons, with complete set of change gears Good Condition Photo
41 MA25087 TOS Volman FO25 Table : 1500 mm,
Table hole : 200 mm,
Diam 2000 mm, Module : 30 mm,
Diam 2500 mm, Module : 25 mm,
Diam 3000 mm, Module : 18 mm,
Max. Wheel (diam over 1500 mm) width : 800 mm,
Max. Wheel (diam under 1500 mm) width : 750 mm,
Max. distance between spindle and table : 1320 mm,
Max. mill diameter : 340 mm,
Weight : 25 ton.
Good Condition Photo
42 MA25085 Kolomna Russia 5A342P Max gear diameter : 2000 mm, Min gear diameter : 200 mm, Minimun teeth number : 20, Maximum module : 25 mm, Maximum table load : 2000 kg, Table diameter : 1800 mm, Main motor power : 15 kW, Overall dimensions L x W x H : 6650 x 2990 x 3460 mm, Quantity : 2 nos. 1990 Good Condition Photo
43 MA24878 Tos,Celakovice FO10 Width of work-piece : 400 mm, Table diameter : 850 mm, Max gear diameter without tailstock : 1200 mm, Milling diameter : 170 mm, Milling speed : 20-125 U/min, Hole in table : 100 mm, Main motor : 7.5 kW, Machine dimension : 3120 x 1870 x 2525 mm, Machine weight : 9 ton. 1966 Good Condition Photo
44 MA25075 Schiess,German RF10S Work-piece diameter:
-Min: 50 mm,
-Max: 3000 mm,
Module: 12,
Max module: 30,
Max work-piece weight: 25 ton,
Distance between hob and table axes:
-Min: 100 mm,
-Max: 1600 mm,
External diameter of faceplate: 2200 mm,
Max hob diameter: 340 mm,
Spindle speed range: 9-100 rpm,
Spindle feeds: 0.08-4 mm/rev,
Column feeds: 0.16-8 mm/rev,
Number of feeds: 18,
Fast feed of hob: 170 mm/min,
Fast feed of column: 400 mm/min,
Main motor capacity: 30 kW,
Machine dimensions: 11000x6000x5500 mm ,
Machine weight: about 78 ton.
Good Condition Photo
45 MA25074 Schiess,German RFW10S Work-piece diameter:
-Min: 100 mm,
-Max: 1400 mm,
Max angle of gears: 45 grad,
Max length of hobbing gears: 1850 mm,
Max distance between fixing surface of faceplate and center of back column: 3000 mm,
External diameter of faceplate: 900 mm,
Diameter of worm wheel: 1350 mm,
Max work-piece weight: 10 ton,
Max diameter of mill: 340 mm,
Opening in hobbing spindle: 80,
Rev of spindle/ min: 9-100,
Main drive: 24 kWt,
Drive of face plate: 30 kW.t
Good Condition Photo
46 MA24978 Reinecker Max diameter : 1600 mm,
Max modul : 20 mm.
Good Condition Photo
47 MA24819 WMW Modul ZFWZ08 Max work piece diameter : 800 mm,
Module : 14 mm,
Axial feed : 560 mm,
Tangential feed : 220 mm,
Angle 45°,
Max hob diameter : 300 mm,
Max hob length : 320 mm,
Table diameter : 800 mm,
Table bore : 275 mm,
Depth of table bore : 230 mm,
Max table load : 1800 kg,
Distance hob table min / max : 300 / 860 mm,
Main motor : 37 kW,
Distance hob axis table axis min / max : 100 / 580 mm,
Chip conveyor.
1985 Good Condition Photo
48 MA24804 Kolomensky,Russia 5A342 Max diameter gears cut : 2000 mm, Max vertical moving of milling support : 900 mm, Max module of processed wheel (not less): -Worm mill : 20, -Disk mill : 25, -Manual mill : 30 Table diameter : 1800 mm, Max work-piece weight : 20 ton, Max corner : +/- 45 degree, Diameter of installed worm mills : 300...500 mm, Amount of cuting teeths : 10...1800, Spindle speed : 8...125 rpm, Electricity : 50 Hz, 380 V, Main motor power : 20 kW, Overall dimension (LxWxH): 8600x4440x3700 mm, Machine weight: 32040 kg. 1991 Good Condition Photo
49 MA24752 Kolomna Russia 5343 Max. Work piece dia 3200 mm, Min. Work piece dia 300 mm, Table dia. 1800 mm, Max. Work piece Height 1250 mm, Max Module 30 machine dimensions 9570 x 3780 x 5170 mm,Machine weight : 95,000 tons. 1973 Good Condition Photo
50 MA24748 WMW Modul ZFWZ250/3 Max diameter of workpiece : 250 mm,
Max module : 6,
Max axial feeding travel : 275 mm,
Max tangential feeding travel : 100 mm,
Max helix angle : 45°,
Min number of teeth cut : 8,
Minimal number of teeth cut using the indexing : 4,
Max hob diameter : 145 mm,
Max hob length : 170 mm,
Diameter of tightening surface of a table : 275 mm,
Diameter of centering element of a table : 200 mm,
Depth of centering element of a table : 75 mm,
Distance from hob center to surface of work table min 195mm, max 470 mm,
Distance from hob center to center of work table : min 20 mm max 230 mm,
Cone of hobbing : 45,
Hob speed : 500-200 rev/min,
Hob speed variable in 2 ranges : 125/400 rev/min,
Main motor : 7,5 kW,
General power consumption : 20 kW,
Electricity : 50 Hz 380 V,
Machine dimension : 3000 x 3475 x 2200 mm,
Machine weight : 5500 kg.
1985 Not used Photo
51 MI5754 Tos Czech FO10 Max wheel diameter : 1000 mm,
Max module : 10,
Width of work-piece : 400 mm,
( 400 mm width spacer is placed extra under the Tail stock to raise the height),
Table diameter : 850 mm,
Max gear diameter without tailstock : 1200 mm,
Milling diameter : 170 mm,
Milling speed : 20-125 U/min,
Hole in table : 100 mm,
Main motor : 7.5 kW,
Machine dimension : 3120 x 1870 x 2525 mm,
Machine weight : 9 ton.
Machine has complete set of change gears.
Excellent condition,under power Photo
52 MA24719 Schiess Froriep RF30E Min/Max.gera diameter : 50/5000 mm,
Table : 2300 mm,
Table loading capacity : 20 to,
Max. face width : 1200 mm,
Pitch roughing : 5 DP,
Pitch hobbing : 1 DP,
Motor HP : 50,
Hob speed range : 12.5-90 rpm,
Max. hob diameter : 417 mm,
Max. helix angle : 45 degree,
weight : 41 ton,
Equipped with :
Change gears,
Gashing head,
Hobbibg head,
Chip conveyer.
1976 Under power Photo
53 MA24695 Tos Czech FO6 Max.dia :596,9 mm,
Max.diamrteral pitch : 3dp,
Horz/vert : vert,
Dimensions : 2000 x 1000 x 1500,
weight : 5000 kg.
Good Condition Photo
54 MA24558 Pfauter,German RA200 wheel dia 203 mm, Max. helix angle of tooth: 40 degree , Min. number of teeth to be hobbed, -Standard (1-start index drive): 6(9) , -Special (2-start index drive): 4 , Max. number of teeth to be hobbed: 48(72) , DIMENSIONS: Center distance between workpiece and hob , -Min.: 11 mm , -Max.: 140 mm , Diameter of work table: 220 mm , Diameter of table bore: 62 mm , Bore of table bushing: 72 mm , Diameter of hob arbors (1 included with machine): 21 mm, 24 mm, 19 mm, 11 mm , Hob spindle taper: Morse 4 , Max. hob dimensions: , -Diameter: 124 mm , -Length: 176 mm , Max. hob shift-manual or automatic: 110 mm , Hob speed-adjustable from: 80 - 500 R.P.M. , ELECTRIC SPECIFICATIONS Voltage (standard): 220/380 volts , Frequency (standard): 50 Hz , Rated output of main motor: 10 HP , Total power consumption Of machine: 16.5 kVA , WEIGHT AND SPACE REQUIRED: Weight of the machine: 7 ton , Dimensions of the machine: 3600x2000x2400 mm . Very nice Photo
55 MA24523 Tos Czech OFA32A Maximum gear diameter : 320 mm,
Maximum module to be hobbed : 7 mm,
Hob head travel : 250 mm,
Distance hob axis to table axis minimum : 40 mm,
Diastanc ehob axis to table axis maximum : 300 mm,
Maximum helical angle of gear teeth : 45 ,
Maximum diameter of hob : 150 mm,
Maximum length of hob : 200 mm,
Hob speeds in steps : 70-450 rpm,
Diameter of work table : 300 mm,
Bore in work table : 80 mm,
Axial feeds : 1-220 mm/min,
Radial feeds : 0.5-25 mm/min,
Rapid traverse, axial : 22 IPM (560mm/min),
Radial : 11.8 IPM (300 mm/min),
Tangential :60/30 mm/min,
Approximate dimensions : 2480 LRx 2,352,5 FB,
App.height : 1791.25,
App. weight :14,000 Tons,
Equipped with:
Automatic double cut cycle,Hydraulic work clamp, Hydraulic system, Chip conveyor, Hob arbors, Tailstock with center.
Excellent Photo
56 MA24519 WMW Modul ZFWZ8000 Max. diameter 8000 mm,

Max. modul 40,

Machine is installed, under power, with rich accessories.
1973 Good Condition Photo
57 MI5727 Tos Czech FO25 Swing dia. : 3000 mm, Good Condition Photo
58 MA24154 Kolomna Russia 5A370 Max wheel diameter : 500 mm,
Gear width : 2500 mm,
Max. module : 20/25,
Min wheel diameter : 50 mm,
Hobbing length : 2500 mm,
Number of teeth : 6-200,
Diameter of hob : 250 mm,
Cutter length max : 300 mm,
Milling head speed : 10-103 rpm,
Main gear -box motor : 18,5 kw,
Max angle of teeth : +/-45 degree,
Workpiece weight : 4000 kg,
Total power requirement : 25 kw.
1964 Good Condition Photo
59 MA24091 Tos Czech FO10 Module : 10mm,
Max. milling dia : 1000 mm.
Good Condition Photo
60 MA24086 Tos Czech FO8 Max diameter of milled wheel : 800 mm,
Max milled modul : 8,
Main motor output : 3.7 kW,
Dimensions : L x W x H : 2540 x 1400 mm,
Machine Weight : 2800 kg.
1963 Good Condition Photo
61 MA24055 WMW Modul ZFWZ800 x 10 Max gear diameter 800 mm, Max modul 10 mm, Machine dimensions 3720 x 1760 x 2300 mm, Machine weight 7 tons. Good Condition Photo
62 MA24033 Komsomolec 53A11 Max work piece diameter : 1250 mm,
Table diameter : 1000 mm,
Module : 16,
Max helix angle of gear hobbed degree + - / 45,
Distance between table and cutter axes : 100...750 mm,
Distance between table surface and hob axes : 235...835 mm,
Max diameter of hob mounted : 225 mm,
Max length of hob mounted : 250 mm,
Max vertical travel of hob slide : 650 mm,
Taper of hole in hob slide : 6,
Maximal hob axial travel : 245 mm,
Spindle speed : 28...270 rpm,
Main drive power : 15 kW,
Machine dimensions : 4020 x 2350 x 2780 mm,
Machine Weight : 17900 kg.
1988 Good,unused Photo
63 MA23988 Kolomna Russia 5342 Max work piece diameter : 2000 mm,
Max work piece length : 500 mm,
Table diameter : 1800 mm,
Max work piece weight : 10000 kg,
Module : 20,
Max diameter of installed worm mills : 300 mm,
Max length of installed worm mills : 500 mm,
Main motor power : 14 kW,
Machine Weight : 32000 kg.
1965 Good Condition Photo
64 MA23914 Pfauter,German P1501 Gear dia- max : 1500 mm,(60),
Gear width : 600 mm,
Moudule max : 16,
Distance between table and the middle of the spindle : 960 mm,
No. teeth : min 8,
Milling dia : 255 mm,
Cutter width : 280 mm,
Distance between centres : 60-870 mm,
Adjustment of spindle : 250 mm,
Swing of milling guides : 240 grad,
Table dia : 1200 mm,
Table bore : 255 mm,
RPM of spindle : 12-140 rpm,
Axial feed : 0,05-6,30 mm/rev,
Tang feed : 0,22-2,55 mm/rev,
Radial feed : 0,18-2,0 mm/rev,
Elecrical : 380/50 V/Hz,
Capacity : 38,5 kW,
Weight : 17,700 kg,
Diamensions : 7,3 x 3,4 x 4,7 mm.
1982 Good Condition Photo
65 MA23901 WMW Modul ZFWZ6300 x 40 Max. Wheel dia : 6300 mm, Gear Width : 1500 mm, Max. Module : 40, Cutter Diameter max : 400 x 500 mm, Table Surface area : 4000 mm, Table Speed : 9 - 63 U/Min, Max. Angle of teeth : 45 Grad, Total Power : 47 kW, Machine Weight : 160 Tons, With Standard Hob head, Tangential Hob head, Internal Head, Set of change gears, set of plots etc. 1966 Good Condition Photo
66 MA23828 Tos Czech FO10 Max wheel diameter : 1000 mm,
Max modul : 10,
Width of work-piece : 400 mm,
Table diameter : 850 mm,
Max gear diameter without tailstock : 1200 mm,
Milling diameter : 170 mm,
Milling speed : 20-125 U/min,
Hole in table : 100 mm,
Main motor : 7.5 kW,
Machine dimension : 3120 x 1870 x 2525 mm,
Machine weight : 9 ton.
1966 Good Condition Photo
67 MA23719 Kolomna Russia 5A342P Max gear diameter : 2000 mm, Min gear diameter : 200 mm, Minimun teeth number : 20, Maximum module : 25 mm, Maximum table load : 2000 kg, Table diameter : 1800 mm, Main motor power : 15 kW, Overall dimensions L x W x H : 6650 x 2990 x 3460 mm. Complete ,good working condition Photo
68 MA23635 Kolomna Russia 5A342P Max gear diameter : 2000 mm, Min gear diameter : 200 mm, Minimun teeth number : 20, Maximum module : 25 mm, Maximum table load : 2000 kg, Table diameter : 1800 mm, Main motor power : 15 kW, Overall dimensions L x W x H : 6650 x 2990 x 3460 mm.
With tailstock.
1988 Excellent Photo
69 MA23625 WMW Modul ZFWZ3150 x 30 Max.diameter without the holder : 3150 mm,
Max. diameter with the holder : 1600 mm,
Min. diameter : 500 mm,
Min. width of a tooth : 1000 mm,
Module : 30,
Max corner of an inclination of a tooth : 45,
Max rearranging of a tangential pusher : 500 mm,
Mill,
Max diameter : 350 mm,
Max length : 440 mm,
Tightening a table :
Diameter : 2400 mm,
Aperture : 500 mm,
Depth of an aperture : 1100 mm,
The greatest loading : 30,
Vertical distance between the midle : 700-1900 mm,
Mills and a surface of a table ,
Horizontal distance between the midle : 300-1800 mm,
Mills and the middle of a table.
Good Condition Photo
70 MA23574 Pfauter,German P1250 Wheel diameter max : 1250 mm,
Gear width : 580 mm,
Module max : 12,
Length of teeth cutting max : 500-580 mm,
Table diameter : 950 mm,
Table bore diameter : 200 mm,
Hob diameter : 220 mm,
Cutter length max : 260 mm,
Shifting : 240 mm,
Total power requirement : 20 kW,
Machine dimensions without control cabinet : 4025 LR x 1850 FB x 2500 H mm,
Electrical control cabinet dimensions : 425 x 1600 X 1775 H mm,
Machine weight : 30,000 lbs.
EQUIPPED WITH:
Universal Hob Head. Automatic Hob Shifting. Radial Feed. Differential. Radial And Axis Rapid Traverse. Power Clamping. Stepless Hob Speed Control. Stepless Feed Control. Miscellaneous Change Gears.



1966 Good Condition Photo
71 MA23557 Tos Czech FO16 Max. gear diameter 1600 mm, max. gear widht above 1.350mm 560 mm, max. gear widht below 1.350mm 500 mm, Max. Modul / max. module 16, table diameter 1350 mm, Through boreof clamping table 180 mm, max. distance hob spindle-surface of table 1050 mm, min. distance hob spindle-surface of table 400mm, hob spindle speed 16-80 rpm, weight 18,5 ton, motor power 20 kW, dimension 4260 x 2255 x 3170 mm, Output of main motor 12 kWp, Machine high : 3170 mm, Machine Weight : 18500 kg. Good Condition Photo
72 MA23536 WMW,Germany ZFWZ5000 x 40/I Max turning dia : 5000 mm,
Max module : 40,
With Milling head,
Table diameter : 4000 mm,
Table center hole diameter : 800 mm,
Depth : 1500 mm,
Table load 60 t,
Spindle taper : 100 metric,
Head rotation : 195 degrees (15 degrees to the right and to 180 degrees to the left),
Min/ max axis distance 500/2800 (3000) mm - distance between cutter axis and table axis,
Min/ max vertical move 840-2540 mm - distance between table surface and cutter axis,
Electric power requirement appr. 35 kW,
Net weight : 120000 kg,
Complete weight : 140000 kg (with accessories),
FIVE HEADS AVAILABLE :-
Universal cutting head: max diameter 5000 mm, max gear width 1500 mm, max modul 40,
Inner gear disc cutting head to universal gear cutting head: min-max gear diameters 2000-4000 mm, max gear width 300 mm, max modul 24, largest disc cutter diameter 400 mm and width 130 mm.
Tangential cutting head : min-max gear diameters 800-5000 mm, max modul 40, largest cutter diameter 400 mm, cutter tangential move 850 mm,
Finger cutting head for outer gears: min-max gear diameters 800-5000 mm, max gear width 1500 mm,
Finger cutting head for inner gears: min-max gear diameters 1000-4000 mm, max gear width 350 mm, max modul 50
Additional plano milling head for ring millings,
OTHER ACCESSORIES :-
Change gears (very less used - see on photos),
Table supports (8+8 pcs, all scew),
Arbors,
weight,
Centering devices.
1956 - 1960 Good Condition Photo
73 MA23510 Craven,UK Max diameter part : 3000 mm,
Max hob diameter conventional head : 312 mm,
Max hob diameter on tangential head : 400 mm,
Max hob diameter on projection head : 200 mm,
Max D.P hobbing : 1 D.P.
Max D.P single milling : 3/4 D.P,
Max face width of gear cut : 900 mm,
Max travel of hob head : 925 mm,
Max hob length : 400 mm,
Max angle of tooth 45 degrees,
Max tangential shift traverse of hob : 425 mm,
Table diameter : 1500 mm,
Table bore : 300 mm,
125 mm Deep distance between,
Hob and table center 100 mm - 1500 mm,
Drive motor 20 HP V/F,
Drive tailstock & Overhead support not available approx.
Dimensions 86 W x 192 L x 132 H,
Electrics : 400 Volt 3 Phase,
Approx Weight : 45,000 LB.
Equipped with :
Conventional hob head,
Tangential hob head,
Small hobb head for 1.25 hob arbor,
Coolant system,
Assortment of index and differentail gears drve arbors.
Good Condition Photo
74 MA23505 Pfauter,German P1501 Max. wheel diameter : 1500 mm,
Gear width : 600 mm,
Max. module 16,
Distance table - spindle center : 960 mm
Min. number of teeth 8,
Diameter of hob : 255 mm,
Width of hob : 280 mm,
Axis distance between centers : 60 - 870 mm,
Adjustment of milling-spindle : 250 mm,
Milling slide swivelling : 240 Grad,
Table diameter : 1200 mm,
Table hole : 255 mm,
Milling head speed : 12 - 140 U/min,
Feeds axial : 0,05 - 6,30 mm/U,
Tangential feed : 0,22 - 2,55 mm/U,
Radial feed : 0,18 - 2,0 mm/U,
Electrics - voltage/frequency : 380/50 V/Hz,
Total power requirement : 38,5 kW,
Weight of the machine ca. : 17.700 kg,
Dimensions of the machine ca. : 7,3 x 3,4 x 4,7 m,
Total power requirement : 38,5 kW,
Accessories :-
Twin-cut cycle,
Autom. indexing device,
Prime number - milling device,
Automatic hob movement,
Complete covering,
New electrical cabinet,
Intern. milling head with oil-cooled milling motor.
1973 Good Condition Photo
75 MA23501 Schiess,German From the manufacturer it came as a 5-meter.
Was made the modernization and increased processing diameter up to 6300 mm,
Module 70.
Good Condition Photo
76 MI5678 WMW ZFWZ3150x30 Table dia 2400,
Face width 1200,
Max load 50 T,
Module 40,
Max gear dia 4800 with milling cutter.
Dismantled,Good condition Photo
77 MA23475 Russian 5K328A Diameter of table :1000 mm,
Maimum diameter of hobbung : 1250 mm,
Moudalup to :12-14,
Total weight of machine :14 tns,
1 x Liebher LS200,
1 x Modul 350,
1 x Pfauter P630 RS2,
1 x Fellows 74max,
1 x Pfauter RS9.
1979 Very nice Photo
78 MA23450 Liebherr L402 Max. wheel diameter 400 mm
Gear width 300 mm
Max. module 8
Max. distance f. working table to backing device: 700 mm
Max. distance f. working table to center spindle: 300 mm
Milling tool taper MK 5
Diameter of hob max 192 mm
Milling cutter width max 250 mm
Centre distance of the spindles min./max 30 / 300 mm
Adjustment of milling-spindle 200 mm
Milling slide swiveling 40 Grad
Table diameter incl. water channel 420 mm
Table bore diameter 100 mm
Max. loading on the table 800 kg
Milling head speed 32 - 256 U/min
Feed per workpiece rotation 0,1 - 10 mm
Nominal power 8,5 KV
Weight of the machine 10 000 kg
Dimensions of the machine 4500 x 3500 mm
1978 Perfect condition ,as new Photo
79 MA23385 Wuhan,Chinese Y31500A Max modulus is 40, the max swing is 5000mm for fine cutting, and 6300mm for rough cutting. 1994 Good condition,under power Photo
80 MA23271 Pfauter,German P251 Max wheel diameter : 250 mm,
Max wheel width : 242 mm,
Max module : 6 mm,
Min number of teeht : 2,
Milling cutter diameter X width : 130 x 155 mm,
Adjustment of milling - spindle : 115 mm,
Milling slide swivelling : 240 mm,
Table diameter : 250 mm,
Table hole : 63 mm,
Electrics-voltage / frequency : 380 / 50 V/Hz,
Distance table / counter stay 565 mm,
Distance table / middle of spindle 380 mm,
Center distance between workpiece-tool min/max : 10 - 210,
Main drive : 6,6 kW,
Main motor : 13,6 kW,
Dimensions : 2800 x 1900 x 2500 mm,
Weight of machine : 3600 kg.

Good Condition Photo
81 MA23238 Russian KY250 Accuracy class H,
Maximum diameter of the manufacturing sector 20000 mm,
The smallest diameter of the manufacturing sector 8100 mm,
The largest sector of the central angle of 45 degrees.,
Maximum weight of installed products 50 000 kg,
The largest unit of cut 60 mm,
The number of cut teeth crown 100-500,
Maximum height of 550 mm sector,
The greatest length of the sector along the chord 3300 mm,
Table working surface 3800x2450 mm,
Machine dimensions 11400x10500x7800 mm,
Machine weight 240000 kg.
Designed for face milling and milling sectors of the tooth in terms of individual and mass production. The machine can produce milling sectors of the external surfaces of crowns by cutting and slicing spur sectors by dividing the unit disk and end mills.
1981 Good Condition Photo
82 MA23228 Kolomna Russia 5A342 Max diameter gears cut : 2000 mm,
Max vertical moving of milling support : 900 mm,
Max module of processed wheel (not less):
-Worm mill : 20,
-Disk mill : 25,
-Manual mill : 30
Table diameter : 1800 mm,
Max work-piece weight : 20 ton,
Max corner : +/- 45 degree,
Diameter of installed worm mills : 300...500 mm,
Amount of cuting teeths : 10...1800,
Spindle speed : 8...125 rpm,
Electricity : 50 Hz, 380 V,
Main motor power : 20 kW,
Overall dimension (LxWxH): 8600x4440x3700 mm,
Machine weight: 32040 kg.



1976 Good Condition Photo
83 MA23217 Kolomna Russia 5A342P Max gear diameter : 2000 mm,
Min gear diameter : 200 mm,
Minimun teeth number : 20,
Maximum module : 25 mm,
Maximum table load : 2000 kg,
Table diameter : 1800 mm,
Main motor power : 15 kW,
Overall dimensions L x W x H : 6650 x 2990 x 3460 mm.
Good Condition Photo
84 MA23212 Russian 53B30P Maximal outer diameter of gear to be cut 320 mm,
Maximal module to be treated 6 mm,
Maximal helix angle of teeth to be cut 60 deg.,
Maximal width of spur gear face to be cut 220 mm,
Diameter of table 250 mm,
Distance between the tool axis and the table axis:
minimal/maximal 30...250 mm,
Maximal diameter of hobs to be installed, mm
- diameter 160
- length 160, 220*
Maximal hob travel along the axis (shifting) 75 mm,
Range of numbers of hob revolutions 50...500 rpm,
Range of upright feeds, mm/rev; 0,63...7,3 mm/min
Range of radial feeds, 1...16 mm/min,
Range of tangential feeds, mm/rev 0,26...2,3,
Power of two-speed primary motion drive 3,2/4,2; 7,5*(4,0/4,75) KW,
Overall dimensions 2300х1300х1950 mm,
Weight of the semiautomatic machine 5100 kg.
Brand New Photo
85 MA23133 FD500 Max. hobbing diameter-500 mm, Max. module-8 mm, Axial travel of milling head-280 mm, Table diameter-500 mm, Power installed -.9,5 kW
Good Condition Photo
86 MA23132 FD 320 Max. hobbing diameter-320 mm, Max. module-6 mm,Main drive motor power-5.5 kW, Machine weight-4000 kg
Good Condition Photo
87 MA23131 FD800 Max. hobbing diameter-..800 mm, Max. module -.10 mm, Table Diameter-..800 mm, Main motor power-7,5 kw, Weight-.11.000 kg
Good Condition Photo
88 MA23121 Chinese Y3150 Max 5 mm steel module,
Casting 6mm,
Process after the maximum diameter of cylindrical gears 350 mm column
After the force-free 500 mm column,
Machining diameter cylindrical helical gear when the helix angle of 30 degrees 370mm,
Machining diameter cylindrical helical gear when the helix angle of 45 degrees 250 mm,
Get the maximum vertical the length 260mm,
The maximum length of a cutting 240mm,
The most large diameter rollers 120mm,
Hob Spindle speed range 50-275/min,
Main motor capacity of 3 kW,
Overall dimensions (length X width X high) 1825X935X1730 mm,
Weight 2400 kg.
Brand New Brand New Photo
89 MA23120 Chinese Y38-1 The machining accuracy of JB179-83.7,
Max 6 mm steel module,
Casting 8 mm,
Process after the maximum diameter of cylindrical gears 450 mm column
After the force-free 800 mm column,
Processing after the minimum diameter cylindrical column gear Bit 0
Machining diameter cylindrical helical gear when the helix angle of 30 degrees 500 mm,
When the helix angle of 60 degrees 190 mm,
Maximum tooth thickness milling (milling gear when) 250 mm,
Hob Spindle speed range 47.5-192 / min,
Hob Spindle Speed Series 7 files,
The total capacity of 3.125 kilowatts electrical,
Main motor capacity of 3 kW,
Overall dimensions (length X width X high) 2290X1100X1910 mm,
Weight 3400 kg.
Brand New Brand New Photo
90 MA23113 Pfauter,German P1501 Maximum diameter gear cut : 1500 mm,
Maximum rate D.P : 16 module,
Maximum axial travel of hob slide : 800 mm,
Diameter of the table bore : 1200 mm,
Diameter of work table bore : 255 mm,
Work table bore depth : 820 mm,
Maximum distance between centerline of hob spindle and table : 870 mm,
Minimum distance between centerline of hob spindle and work table : 60 mm,
Maximum distance from table surface to centerline of hob spindle : 1160 mm,
Minimum distance from table surface to centerline of hob spindle : 360 mm,
Maximum distance from table surface to lower bearing surface of tailstock center : 1080 mm,
Minimum distance from table surface to lower bearing surface of tailstock center : 610 mm,
Maximum hob dimensions : 230 x 280 mm,
Hob speed range : 98 to 180 rpm,
Feeds :
Axial : 500-6.000 mm,
Radial : 170-2.000 mm,
Tangential : 200-2.500 mm,
Minimum no teeth cut : 12,
Main drive motor : 15 kW,
Hob head rapid traverse motor : 7,8 kW,
Table rapid traverse drive : 3 kW,
Coolant drive : 85 kW,
Total connected load : 32 kVA,
Machine dimensions overall length : 7480 mm,
Overall width : 2800 mm,
Overall height : 3200 mm,
Machine net weight : 18000 kg.
Good Condition Photo
91 MA23111 Chinese YBS3120 Max. workpiece dia. 200 mm,
Max. module 4 mm,
Max. worktable speed 25 rpm,
Spindle speed/steps 63-330/8 rpm,
Distance between hob axis and worktable surface 125-295 mm,
Center distance between tool and worktable 20-170 mm,
Distance between end face of bearing hole of tailstockand worktable surface 240-438 mm,
Hob shifting travel (manual) 50 mm,
Max. swiveling angle deg. +/- 45,
Max. hob dia. and length 110 x 110 mm,
Worktable surface dimensions dia. x bore dia. 180 x 40 mm,
Worktable T-slot (No x type)3 x M12,
Total power/Main motor power 4.3/3 kVA/kW,
Machine dimensions (LxWxH)1740x1150x1570 mm,
Case dimension (LxWxH) 1940x1490x1870 mm,
Weight : Net: 2000 kg., Gross: 2250 kg.
With Standard attachments,One set of standard change gears, one set of special tool, hob arbors of dia 22 and dia 27 for each one.
Brand New Photo
92 MA22988 Gould & Eberhardt 72H Max. DP in Steel 1.5 DP,
Face Capacity : 900 mm,
Max MODUL 25,
Max. Dia. Spur Gear w/ Support : 1200 mm,
Max. Dia. Spur Gear w/o Support : 2250 mm,
Max. Dia. Helical Gear w/o Sup (45 Deg) : 1800 mm,
Min. Centers Work & Hob Arbors : 75 mm,
Max. Diameter Hob : 268 mm,
Diameter of Work Table : 1000 mm,
Diameter of Index Worm Gear : 1200 mm,
Hob Speed Ranges 6-100 RPM,
Feed Range .03-.200",
Main Motor 15 HP,
Approx. Dimensions 2250 x 5175 mm,
Height with Overarm : 3500 mm,
Approx. Weight : 42,000 lbs.

Good Condition Photo
93 MA22878 Gould & Eberhardt 72HWD Max DP in steel : 1.5 DP,
Face Capacity : 900 mm,
Max dia spur gear w/support : 1200 mm,
Max dia spur gear w/o support : 2250 mm,
Max dia helical gear w/o sup 1800 mm,
Min centers work & hob arbors : 75 mm,
Max diameter hob : 269 mm,
Diameter of work table : 1000 mm,
Diameter of index worm gear : 1200 mm,
Hob speed ranges 6-100 RPM,
Feed range 03-200",
Main motor 15 HP,
Approx dimensions 2250 x 5175 mm,
Height with overarm 3500 mm,
Approx Weight : 42,000 lbs.
Electrics 550V new electric panel,
Standard hob swivel head,
Support,
Basic set of change gears,
3 pcs hob arbor,
Coolant attachment.
Qty : 2 nos.

Very good condition Photo
94 MA22809 Stanko-Russia 5310 Module 4,
Table diameter 150 mm,
Max. work piece diameter 200 mm,
Machine dimensions 1562 x 925 x 1700 mm,
machine weight 1550 kg.
Machine has full set of change gears.
Excellent condition,under power Photo
95 MA22808 Stanko-Russia 5K310 Max. work piece diameter 200 mm,
Module 4,
Table diamerter 200 mm,
Spindle speed 63...400 rpm
Bore taper of the milling carriage (Morse) 4,
Max. tilt angle of the cut wheels' teeth, gr. +-/ 60,
Distance between the axes of the table and the cutter 145...365 mm,
Distance between the table surface and the cutter 45...180 mm,
Max. dimensions of hob mounted 125 x 125 mm,
Main electric motor power 4 kW,
Machine overall dimensions 2000 x 1300 x 2040 mm,
Machine weight 4350 kg.
The semiautomatic machine is intended for hobbing cylindrical spur and oblique tooth wheels from pig-iron, the steel alloyed, easy alloys by a method of a rolling in conditions of a batch production.
Equiped with change gears.
1985 Good Condition Photo
96 MA22807 Komsomolec 53A80K Max. work piece diameter 800 mm,
Max. diameter of worm wheel hobbed 800 mm,
Max. diameter of spur wheel hobbed 800 mm,
Max. diameter of helical wheel with helices hobbed 500 mm,
Module 10,
Table diameter 630 mm,
Min. number of teeth hobbed 12,
Distance between table and cutter axes 80...500 mm,
Distance between table surface and hob axes 195...595 mm,
Max. dimensions of hob mounted 200 x 200 mm,
Max. vertical travel of hob slide 400 mm,
Taper of hole in hob slide (Morse) 5,
Max. hob axial travel 100 mm,
Rotation frequency of hob spindle 40...405 rpm,
Machine overall dimensions 2897 x 1810 x 2250 mm,
Machine weight 10600 kg.
Universal semiautomatic gear-hobbing machine is intended for hobbing cylindrical, spur, helical and worm gears under single-unit and large-scale production conditions. Rolling of the hob and the workpiece carries out a gear cutting. The machine operates on a closed semiautomatic cycle and in adjustment cycle.

The machine has a stationary table and a movable column. This machine may be used for machining of wheels with tubby or taper teeth.
It is equiped with change gears.
1985 Good Condition Photo
97 MA22806 Komsomolec 53A50N Max. diameter of the cut wheels 500 mm,
Module 10,
Min. number of the machined teeth 8 mm,
Table diameter 560 mm,
Max. tilt angle of the cut wheels' teeth, gr. +-/45,
Distance between the axes of the table and the cutter 60...350 mm,
Distance between the table surface and the cutter 195...595 mm,
Maximum vertical motion of the carriage 400 mm,
Bore taper of the milling carriage (Morse) 5,
Maximum axial motion of the cutter 100 mm,
Milling spindle speed 40...405 rpm,
Feed, mm/min:
-vertical: 0,75...7,5
-radial: 0,22...2,25
-tangential: 0,13...2,6
Main drive electric motor power 12,5 kWt,
Machine's dimensions 2670 x 1810 x 2250 mm,
Machine's weight 10200 kg.
Universal gear hobbing machine is designed for milling spur gears, helical spur gear wheels and worm wheels in the single-part and lot production environment. Gear wheels are shaped by way of hob and workpiece running-in. The machine works in a closed semi-automatic cycle and in a setup one. It has a stationary table and a movable column. On the basis of this model there can be manufactured special machines serving to process wheels with barrel-shaped or tapered teeth. Machining is performed by way of sample copying.
1985 Good condition,under power Photo
98 MI5598 Schiess,German RF40 Max. dia : 11,000 mm, Table dia : 6000 & 3500 mm (two tables), Module : 50 mm, Hob dia: 400 mm, Disc cutter dia : 450 mm, Facewidth : 2000 mm, Max. job weight : 40 tons (dia. 6000 mm), With complete set of change gears, supports, Internal & External end mill head. Refurbished in 1975 Good condition,under power Photo
99 MA22797 Staehely SH510 Dia of spur gear 510mm, module 8mm, axial displacement 300mm, dia of index worm wheel 448mm, table bore 125mm, axis dist mid of circular table - mid of cutter 50-340mm, cutter dia x width 150 x 200mm, tangential displacement 170mm, dia of table 540mm, speed of circular table for single threaded dividing gears 16, cutter speeds , stepless 65-325 rpm, axial feeds , stepless 0,45-4,05 mm/WU, installed performance 13 kw, surface requirement l x w x h 2300 x 1650 x 2200 mm, weight 6 t. 1966 Good Condition Photo
100 MA22793 Komsomolec 5B833 Diameter Min / Max : 40/320 mm,
Module Min / Max : 0.5 / 4,
Teeth no. Min./Max 12 / 200,
Spindle Cone - Morse 3,
Angle +/-45 degrees,
hob diam. 180 mm,
main motor 8 kW,
weight 7.000 kg.
1983 Good Condition Photo
101 MA22792 Tos Czech FO16 Max. gear diameter 1600 mm,
max. gear widht above 1.350mm 560 mm,
max. gear widht below 1.350mm 500 mm,
Max. Modul / max. module 16,
table diameter 1350 mm,
Through boreof clamping table 180 mm,
max. distance hob spindle-surface of table 1050 mm,
min. distance hob spindle-surface of table 400mm,
hob spindle speed 16-80 rpm,
weight 18,5 ton,
motor power 20 kW,
dimension 4260 x 2255 x 3170 mm,
Output of main motor 12 kWp,
Machine high : 3170 mm,
Machine Weight : 18500 kg.
Good Condition Photo
102 MA22767 Lorenz LF315 Maximum Gear Diameter 315mm, Maximum Module 6,Max hob slide travel 300mm,Hob speed infinitely variable 120 to 300 rpm, Work table dia 450mm,Hob arbour dia 32mm. 1971 Good Condition Photo
103 MA22758 Schiess Froriep RF30-40-50 Min. & Max. Hobbing dia :- 700 - 5000 mm, Faceplate dia : 3000 mm, Hole in faceplate : 800 mm, Depth of hole in faceplate : 1000 mm, Max. dia. of job : 5000 mm, Distance from hob axis to faceplate : 450 - 2500 mm (min - max), Max. hob dia : 450 mm, Hob vertical travel : 2000 mm, Horizontal table movement : 1800 mm, Max. module in steel with rough mill cutter : 40, Max. module in steel with disk mill cutter : 60, Max. module in steel with end mill cutter : 70, Max. job weight on table : 40 Tons, No. of teeth cut : 16 - 400 teeth (min - max), Max. hobbing angle : 45 degree (+-), Main motor speed : 600 - 2400 RPM, Main motor : 33 kW, Machine has been revised and now the max. dia is 7000 mm. 1978 Good Condition Photo
104 MA22752 Liebherr L301 Maximum Pitch For Hobbing Steel 4,25 DP Maximum Workpiece Diameter 300 mm, Travel Of Hob Head Carriage 225 mm, Work Table Diameter 215 mm, Hob Spindle Centerline Above Machine Table 165 mm Minimum, Maximum Length Of Workpiece 680 mm, Infinitely Variable Radial Feed 0.9906 - 1198 mm/Minute Rapid Traverse Of Hob Slide 960 mm/Minute Weight Of Machine 14,000# Approx Maximum Hob Length 150 mm, Maximum Hob Diameter 140 mm, Maximum Hob Shift Or Tangential Travel 150 mm, Hob Head RPM, Infinitely Variable 80 - 640. Equipped With : Tailstock, Coolant, Chip Conveyor, Change Gears - 2 Set Ups, Two Cut Cycle, Crowning, Differential, Willy Vogel Lubrication, Auto Hob Shift, 440 3ph 60 Cycle, Climb Hobbing. ,with Change Gears
1968 Good Condition Photo
105 MA22723 Stanko-Russia 5S23P Max diameter of the cut wheels, 125 mm,
Module : 2,5,
Number of the machined teeth 5-200,
Max tilt angle of the cut wheels teeth, gr +-/45,
Max hypoid spindle travel up/down, 35/15 mm,
Spindle speed rpm 110...550,
Machine weight 2900 kg,
Qty : 9 units.
1982/1990 Excellent condition,under power Photo
106 MA22664 WMW Modul ZFWZ400/4 Max wheel diameter: 400 mm
Min module: 1
Max module: 6
Table diameter: 370 mm
Max wheel diameter:
-With counter-stay: 340 mm
-Without counter-stay: 400 mm
Max axial offset: 275 mm
Max tangential adjustment: 100 mm
Tooth helical angle: 45 degrees
Max cutter diameter: 145 mm
Max hobbing length: 170 mm
Hob turning speeds capacity: 63-180 U/min
Feeds infinitely variable axial: 0,2-10 mm/U
Feeds infinitely variable tangential: 0,1-5 mm/U
Radial for spur gears: 0,1-4 mm/U
Radial for worm gears: 0,025-1 mm/U
Rapid traverse axial: 500 mm/min
Rapid traverse tangential: 250 mm/min
Radial for spur gears: 400 mm/U
Radial for worm gears: 100 mm/U
Motor power: 7.4 kW
Dimensions: 3000x3300x2450 m
Machine weight: 5500 kg
Good Condition Photo
107 MA22663 WMW Modul ZFWZ250/3 Max diameter of work-piece: 250 mm
Max module: 6
Max axial feeding travel: 275 mm
Max tangential feeding travel (hob shift): 100 mm
Max helix angle: 45 degree
Min number of teeth cut: 8
Min number of teeth cut using the indexing: 4

WORKPIECE DIMENSIONS
Max hob diameter: 145 mm
Max hob length: 170 mm
Diameter of a tightening surface of a table: 275 mm
Diameter of a centering element of a table: 200 mm
Depth of a centering element of a table: 75 mm
Distance from the hob center to surface of work table:
-Min: 195 mm
-Max: 470 mm
Distance from the hob center to the center of work table:
-Min: 20 mm
-Max: 230 mm
Cone of the hobbing: 45

CAPACITY AND DIMENSIONS
Hob speed: 50-200 rev/min
Hob speed variable in 2 ranges: 125-400 rev/min
Main motor: 7,5 kW
General power consumption: 20 kw
Electricity: 50 Hz 380 V
Machine dimension: 3000x3475x2200 mm
Machine weight: 5500 kg

Good Condition Photo
108 MA22655 Gould & Eberhardt 36H Maxi module to be hobbed : 8.5,
Height maxi to be hobbed for gear with straight teeth : 457 mm,
Height maxi to be hobbed for gear with helical teeth : 355 mm,
Max diameter of hob for straight gear without support : 812 mm,
Maw diameter of hob for helical gear without support : 812 mm,
Diameter of work table : 610 mm.
Good Condition Photo
109 MA22636 Liebherr S7V Max Dia 1800 mm,
Max modul :24.
1957/1999 Good Condition Photo
110 MA22632 WMW Modul ZFWZ3150x30/I Max. diameter without the holder: 3150 mm,
Max. diameter with the holder: 1600 mm,
Min. diameter: 500 mm,
Min. width of a tooth: 1000 mm module 30,
Max. corner of an inclination of a tooth: 45 degree,
Max. rearranging of a tangential pusher: 500 mm,
MILL:
Max. diameter: 350 mm,
Max. length: 440 mm,
TIGHTENING A TABLE:
Diameter: 2400 mm,
Aperture: 500 mm,
Depth of an aperture: 1100 mm,
The greatest loading: 30 ton,
Vertical distance between the middle: 700-1900 mm,
SPEEDS:
Hob turning speeds: 12,5 - 71 U/min,
Feeds - axial: 0-16 mm/U,
Feeds - radial: 0-7, 1 mm/U,
Feeds - tangential: 0-8,0 mm/U,
MILLS AND A SURFACE OF A TABLE:
Horizontal distance between the middle: 300-1800 mm,
SET:
Control system: 6000 kg,
Table: 10000 kg,
Bed: 8000 kg,
Bottom part of bed: 9000 kg,
The main rack with ladder: 15000 kg,
The back rack: 10000 kg,
Pusher of rack: 6000 kg,
Box with change gears: 1300 kg,
Additional details: 4000 kg,
Box with equipment for installation of preparation for the machine: 1500 kg,
Tanks: 2000 kg,
Electricity box: 900 kg,
Hidrostation: 500 kg,
Electrical specifications: 380 V, 220V, 50 Hz, 3 MP,
Main motor: 70 kW.

Dimension: 6785x5400x4820 mm.
1957 Good Condition Photo
111 MA22631 WMW,Germany ZFWZ5000 Largest modul 40,
Largest dia. 5000 mm,
Internal cutting head + finger cutting head,
Change gears,
Table supports (16 pcs),
Arbors.
1957 Good condition,under power Photo
112 MA22613 Russian FD500 Max. hobbing diameter 500 mm,
Max. module of teeth 8,
Axial travel of milling head 300 mm,
Main spindle speed range 50-300 rot/min,
Main motor power 8,5 kw,
Vertical working feed range 071-6.3 mm/rev.,
Weight 7000 kg.
1980 Good Condition Photo
113 MA22612 Russian FD400 Max. gear diameter 400 mm,
Max. gear module 8,
Axial travel of milling head 300 mm
Main spindle speed range 50-300 rot/min,
Main motor power 7,5 kw,
Vertical working feed range 071-6.3 mm/rev.,
Weight 4500 kg.
1981 Good Condition Photo
114 MA22601 Russian 5K324A Max. gear diameter 500 mm,
Max. gear module 8,
Main spindle speed range 40-315 rot/min,
Main motor power 7 kw,
Weight 6000 kg.
1981 Good Condition Photo
115 MA22553 Russian 5A342P Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons . 1983 Good Condition Photo
116 MA22551 Pfauter,German P400 Max. module to cut mm. 8
Max. diameter of piece 400 mm,
Max. travel of mill-holder slide 310 mm, Min. nr. of cutting gears: 6 DIMENSIONS Diameter of piece-holder table: mm. 400 Bore diameter of table: mm. 80 Diameter of piece-holder spindle: mm. 36 Max. dimension of milling cutter:
Diameter160 mm, Length 160 mm, Diameter of spindle mill-holder:
With normal accessory 32, 40 mm,
With special accessory 22, 27, 50 mm,
Centre distance between milling and piece:
Max. centre distance 290 mm, Min. centre distance 20 mm,Cone morse: 4,
Max. moving of milling cutter:
Tangential cut 126 mm, Shifting 120 mm, NUMBER OF ROUND AND FEEDS
Milling cutter rpm: rpm 80-500
Axial feed mm/min 0.4-7.5
Radial feed mm/min. 0.1-1.9
Tangential feed mm/min. 0.16-3
ELECTRIC EQUIPMENT
Voltage: V 220/380
Frequency: Hz 50
WEIGHT AND DIMENSIONS
Weight of machine 6.2 tons , Length 4680 mm,
Width 2395 mm,
Height 2515
mm.
Weight of machine : 6200 kg.
Excellent Photo
117 MA22528 Gleason USA 726 Max Pitch Dia 102 - 152mm Root Angle Range 15 - 55 Degrees Pitch Dia 152mm Pitch Dia. Automatic Z chute 127mm Pitch Dia Automatic Gear & Pinion Hopper 102mm Shank length - Loader Stripping Height 102mm Shank Length - Gear & pinion Hopper 38mm Depth 21 inch separate roughing anf finishing 14.8mm Depth 21 inch completeing 10.7mm Face Width at root 21 inch cutters 28mm Index range 8 - 50 Work Spindle Dia. of Tapered Hole at large end 99.22mm Taper per Foot 15.48mm Depth of Taper 15.8mm Counterbore behind taper 57.2 x 77.9mm Dia. of Hole through Spindle 22.3mm Cutting Speeds 21 inch Cutters 32.6 - 49.7 m/min Feeds 21 inch cutters 2.0 - 3.1 sec/tooth Main Drive Motor 10HP Hydraulic Motor 7.5HP Cutting Oil Pump 2HP Complete with Index Plates, Cams & Work Holders Gleason 446 Universal Angular Hand Rolling and Power Gear Tester 0 degs to 180 degs. Shaft Angles 7.5 Dia. 2 Speed Motor motor Driven pinion Spindle with brake on gear Spindle . Forward & Reverse Drive.
With 12 pieces gear cutter. Qty : 5 Machines.
Good Condition Photo
118 MA22437 Hitachi 900HC Max gear diameter 900 mm,
Max gear width 450 mm,
Max module 13,
Max hob cutter diameter 180 mm,
Hob spindle speed range 30-300 rpm,
Main motor power 7.5 kW.
1963 Good Condition Photo
119 MA22381 Kolomna Russia 5A342 Max diameter of Workpiece 2000 mm,
table diameter 1800 mm,
max modul 20,
incl. change gears,
incl. 3 milling heads.
1978 Very good condition Photo
120 MA22365 David Brown MT60 Table Dia 1000 mm,
Max dia for spur gears and worm wheels 1500 mm,
Max pitch 12 module,
Weight 12 ton.
Reconditioned 2009 Good Condition Photo
121 MA22337 TOS Volman FO6 Max diameter of milled wheel 800 mm,
Max milled module 6,
Main motor output 3.7 kW,
Dimensions l x W x H 2540 x 1400 mm,
Machine weight 4000 kg.
Good Condition Photo
122 MA22314 Schiess,German RF30E Max diameter of straight gears to produced by the single indexing method : 5000 mm,

Max. diameter of gears to be hobbed, or of helical gears to be produced by the single Indexing method : 4300 mm,

max. center distance, hob to table : 2750 mm,

min. gear diameter to be hobbed : 50 mm,

min. center distance, hob to table : 100 mm,

max. face width of gear produced : 1200 mm,

Helix Angle produced max : 45 Degree,

table spindle Bore Diameter : 2300 mm,

max. tableload : 30 ton,

max. hob cutter diameter : 450 mm,

hob spindle speed : 12.5 - 90 RPM,

number of speeds : 18,

max modul : 50.
1980 Good Condition Photo
123 MA22296 Tos Czech FO16 Max. dia of workpiece : 1600 mm,
Max. Modul : 16 mm, Max.
dia of milled wheel : 1600 mm,
Main motor power : 12 kW,
Overall Dimensions : 4260 x 2255 x 3170 mm,
Change gears, tungational head, arbors etc.
Machine Weight : 18.5 Tons.
Very good condition Photo
124 MA22275 Russian 5355 Table diameter:4000mm Table hole:800mm Max. workpiece diameter:8000mm Min. workpiece diameter:500mm Max. workpiece weight:60 t Max. width of wheel:2000mmMax. module: 75 Accuracy class:H Spindle cone: Metric 100 Max. diameter of mill:400mm Max. length of mill:500mm Max. travel:2380mm(93.7") Distance between table and mill axis: Min:500mm, Max:4250mm Distance between table surface and mill axis: Min:820mm Max:3200mm Machine weight:192 t 1961 Good Condition Photo
125 MA22272 TOS Volman FO25 Max gear diameter 2500 mm,
Max module 25 mm,
Max gear width 800 mm,
Max hob size DxL 340x500 mm,
Indexing table diameter 1500 mm,
Hob spindle speeds range 12.5-63 rpm,
Main motor power 14 Kw.
Good Condition Photo
126 MA22223 Hitachi dia 900 mm, modul 13 - 2 machines 1963 Good Condition Photo
127 MA22217 Klingenberg German AFK201AVAU Specification :
max gear wheel diameter 500 mm,
module range 2-8 mm,
gear wheel thickness - 70 mm.
1983 Excellent condition,under power Photo
128 MA22216 1)GEAR HOBBING MACHINE TYPE FD400 WITH SET OF GEARS
MAIN TECHNICAL DETAILS:
-MAX. HOBBING DIAMETER-400 MM
-MAX. MODULE OF TEETH -8 MM
- AXIAL TRAVEL OF MILLING HEAD-300MM
-MAIN SPINDLE SPEED RANGE-50-300 RPM
-MAIN MOTOR POWER-7,5 KW
- VERTICAL WORKING FEED RANGE 0.71-6.3 MM/REV
-WEIGHT-.4.500 KG
WITH SET OF GEARS. PHOTOS ATTACHED.

2) GEAR HOBBING MACHINE TYPE FD500 WITH SET OF GEARS
MAIN TECHNICAL DETAILS:
-MAX. HOBBING DIAMETER-500 MM
-MAX. MODULE OF TEETH -8 MM
- AXIAL TRAVEL OF MILLING HEAD-300MM
-MAIN SPINDLE SPEED RANGE-50-300 RPM
-MAIN MOTOR POWER-8,5 KW
- VERTICAL WORKING FEED RANGE 0.71-6.3 MM/REV
-WEIGHT-.7.000 KG
WITH SET OF GEARS.

3) GEAR HOBBING MACHINE TYPE FD800 WITH SET OF GEARS
MAIN TECHNICAL DETAILS:
--MAX. HOBBING DIAMETER. ..800 MM
-MAX. MODULE OF TEETH -.10 MM
- AXIAL TRAVEL OF MILLING HEAD-425MM
-MAIN SPINDLE SPEED RANGE-28-315 RPM
-MAIN MOTOR POWER-11 KW
- VERTICAL WORKING FEED RANGE 0.4-7.1 MM/REV
-WEIGHT-11.000 KG
WITH SET OF GEARS. PHOTOS ATTACHED.
Good Condition Photo
129 MA22185 Tos Czech F010 Change gears, tungational head. Good Condition Photo
130 MA22172 Pfauter,German P900 1790 V offer. Good Condition Photo
131 MA22139 Liebherr L402 Max. wheel diameter 400 mm
Gear width 300 mm
Max. module 8
Max. distance f. working table to backing device: 700 mm
Max. distance f. working table to center spindle: 300 mm
Milling tool taper MK 5
Diameter of hob max 192 mm
Milling cutter width max 250 mm
Centre distance of the spindles min./max 30 / 300 mm
Adjustment of milling-spindle 200 mm
Milling slide swiveling 40 Grad
Table diameter incl. water channel 420 mm
Table bore diameter 100 mm
Max. loading on the table 800 kg
Milling head speed 32 - 256 U/min
Feed per workpiece rotation 0,1 - 10 mm
Nominal power 8,5 KV
Weight of the machine 10 000 kg
Dimensions of the machine 4500 x 3500 mm
1988 Perfect condition ,as new Photo
132 MA22083 Pfauter,German P630R max. wheel diameter 630 mm,
max. module 10,
hobbing width 330 mm,
table diameter 550 mm,
milling head -swivable +/- 210 °,
hob turning speeds 25-140 rev/min,
Total power requirement 23 kW,
weight approx. 9500 kg,
Dimension of the machine l/w/h 6,1 x 3,9 x 3,8 m,
with digital readout, change gears, chip conveyor.

1980 Good Condition Photo
133 MA22081 Pfauter,German P400 Gear dia. 400 mm,
Gear width 285 mm,
Modul 0,5 - 6 ( 8 ),
Table dia 400 mm,
Table bore 80 mm,
Spindle 80 - 500 rpm,
Axial feed 0,4 - 7,5,
Radial feed 0,1 - 1,9,
Tang. feed 0,17 - 3,15,
Hob dia. 160 mm,
Hob length 180 mm,
Capacity 17 kW.

1971 Good Condition Photo
134 MA22080 Pfauter,German P630 Complete with change gears,
Two cut cycle,
Differential and tooling,
Hob dia and width 192 x 240 mm,
Hob spindle adjsutment 200 mm,
Table dia 550 mm,
62 - 390 rpm,
Axial feed 0,16 - 26,8,
Radial feed 0,04 - 70,
Tang. feed 0,06 - 90,
Dimensions 6,1 x 3,1 x 3,5 m.

1962 Good Condition Photo
135 MA22070 Chemnitz ZFWZ03 Control : Siemens Sinumerik 3,
Working dimensions
Workpiece diameter : max.315mm,
Modul : max 8,
Angle : max 45,
Tooth number : min 10,
Dimensions : Lenght 440m, width 320m, height 270m.


1990 Very good condition Photo
136 MA21944 5K328A Max. module of the gear:12mm, Max. Diameter of the gear:1250mm, Table diameter:1000mm, Main electric power:10kW, Dimensions:3580x1790x2590mm, Weight:14,000kg Very good condition Photo
137 MA21913 WMW,Germany ZFWZ630 ax. wheel diameter 630 mm,
gear width 400 mm,
max. module 10,
min. module 1,
total power requirement 35 kW.
weight of the machine ca. 9,5 t.
dimensions of the machine ca. 3,5 x 2,5 x 2,3 m.
Good Condition Photo
138 MA21886 Russian 5A342PF2 Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons, 1992 Good Condition Photo
139 MA21821 Karats,Japan GH27 Table dia. : 3200 mm,
Swing dia. : 254 - 10000 mm (table extended),
Width of a tooth : 1100 mm,
Max. hob module : 32,
Hob size : 460mm(dia.) × 610 mm (length),
Main spindle speed : 5-50rpm (12 steps),
Power of main motor : 15Kw,
Power of hydraulic motor : 0.75Kw,
Max. weight of work-piece : 40 Tons,
Weight of machine : 80 Tons.
Accessories:
Outside support : 1 set,
Gauge for cutter setting : 1 set,
Support with rollers : 1 set,
Change gears : 1 set.
Good Condition Photo
140 MA21806 Russian 5342 Cutting dia 2000 mm;
Max.cutting length 500 (700) mm;
Max. modul 20 mm (steel)
Max. workpiece weight 10 000 kg
Weight of machine 32 ton
[16:10:09] Kipling / Антон Max. loading on Table: 10 ton
-with vertical cutting 560 mm (22")
-with radial cutting 760 mm (30")
Max. Tooth Rake +/- 45 degree
Max. Mill Diam 250 mm (10")
Max. Mill Length 300 mm (12'')
Milling Spindle RPM 8...100
Spindle Morse 6
Main Motor 14kW
Total Main powered: 22.02 kW
Machine Dimensions 6910 x 2990 x 3462 mm
with internal cutting device, change gears.
Tailstock could be provided (as option)
- 2 machines
1957 ,1958 Very good condition,Under power Photo
141 MA21780 Pfauter,German PA300NC max. wheel diameter 350 mm,
max. module 8,
hobbing width 250 mm,
table diameter 300 mm,
workpiece length - max. 264 mm,
milling head -swivable +/- 90°,
shifting 170 mm,
Total power requirement 10,57 kW,
weight approx.7800 kg.
Dimension of the machine l/w/h 5,9 x 2,6 x 3 m.
1978 Good Condition Photo
142 MA21773 Lorenz E30 Max./Min. workpiece dia. : 6000 / 150 mm,
Table diameter : 1760 mm,
Max. module : 27,
Hob diameter : 300 mm,
Hob length : 350mm,
Clamping table diameter : 2000mm,
Single cutting is possible.
Original working diameter=3000mm/

Bed is extended by 1500mm(extended part is made by cast)/

Now max. working diameter=6000mm/
Accessories are complete.

1977 Good Condition Photo
143 MA21732 Russian 5345 dia of gear machined 5000 mm , dia of gear machines with hob 5000 mm , min dia of gear machined 800 mm , max tooth helix angle machined with hob , deg +- 45 , max module of gear machined : with hob 40 mm , with module milling cutter 50 mm , max milling length : with vertical feed 2000 mm , with radial feed 2200 mm , mass of gear machined (with fixture) 65 tons , dia of table working surface 4000 mm , distance between milling and table spindle axes : min 500 mm , max 3050 mm , distance between milling spindle axis and table surface : min 820 mm , max 3040 mm , number of electric motors installed 10 , main drive DC electric motor : power 42 kW , rotation frequency 250 - 1500 /min , aggregate power of electric motors installed 59.96 kW , machine overall dimensions 11070 x 5090 x 6140 mm , machine weight 132 tons 1978 complete,excellent condition Photo
144 MA21727 Pfauter,German 1250 Max. wheel dia.: 1250 mm,
Table dia.: 1000 mm,
Vertical stroke: 600 mm,
Max. module: 12,
Table center hole dia.: 250 mm.
Good Condition Photo
145 MA21722 Russian 5343 max workpiece dia 3150mm, max module 32mm, table dia 2800mm, max workpiece height 1200mm, max workpiece weight 45000kg, main drive power 26kW, total machine weight capacity 81000kg.
1972 Good Condition Photo
146 MI5496 Pfauter,German RA100 Max Work Dia.: 100 mm,
Max Module (pitch) 4 mm 6 DP,
Max Axial Slide Travel 120 mm,
Min/Max Number of Teeth
-Standard 2 Start Index Drive 5/36
-Optional 2 Start Index Drive 4/24
-Optional 4 Start Index Drive 2/12,
Max Hob Head Swivel +/-40 degrees,
Max Table Speed 50 - 150/min,
Hob Shift Travel 120 mm,
Hob Speeds 180 - 400/min,
Axial Feed 12 Steps Via Change Gears .5 - 6.96 mm/rev,
Center Distance Btwn Work & Hobb 25-110 mm,
Work Table Dia. 150 mm,
Table Bore Dia 63 mm,
Hobb Arbor Dia. 27 mm,
Max Hobb Size 100 mm x 140 mm length.
Good Condition Photo
147 MI5495 Mikron 102 Wheel max diameter in mm - 120mm
Module: 2.
Good Condition Photo
148 MA21440 Russian 5A342PF2 Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons, Manuals and Tech. docs available. All change gears,tailstock, arbors , manuals, instruments, hobs etc available. 1991 Excellent Photo
149 MA21434 Russian 5A342PF2 Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons 1978 Good Condition Photo
150 MA21422 Russian 1000 Table dia 950 mm
Max workpiece dia 1000 mm
Max. workpiece dia. without tailstock 1250 mm
Max. Module 20
Workpiece width 500 mm
Distance from center of head to top of table :
min 100 mm
max 700 mm
Max. workpiece weight 3.5 ton
Main motor power 38 kw

Full set of change gears
Hob arbors 4
Manuals none
1982 Good Condition Photo
151 MA21400 Gould & Eberhardt 96H Diametral Pitch Rating, Maximum 1.5 DP Spur Gear Diameter Maximum Rating w/Outboard Support In Place 2400 mm,
Spur Gear Diameter Maximum Rating
w/Outboard Support Removed 3125 mm,
Face Capacity Spur Gears 1050 mm,
Table Load Capacity, Maximum 75000 LBS Center Distance Work & Hob Arbor, Max. 1900 mm,
Center Distance Work & Hob Arbor, Min. 200 mm,
Work Table, Diameter 1950 mm,
Hole Diameter In Table 650 mm,
Hob Diameter Range 46.875 to 175 mm,
Index Worm Gear Diameter 1900 mm,
Worm Shaft Speed, Maximum 400 RPM.
(14) Hob Speeds, Range 6 to 100 RPM Cutter Feeds, Range .45 to 8 IPM Feeds, Range.003 to .020 IPR Floor Space Required, (L x W) 7800 x 225 mm,
Overall Height 4500 mm,
Weight, Approximately 85000 LBS.
Qty. : 2 Nos.
Good Condition Photo
152 MI5466 Stanko-sedin Dia- 800 mm Good Condition Photo
153 MI5465 Stanko-sedin Dia- 300 mm, Hydraulic hobber Good Condition Photo
154 MA21262 Russian 5A342 Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons. 1965 Complete,very good condition Photo
155 MA21234 Pfauter,German P2300 Workpiece dia with/without arbor supports 1600 / 2300 mm , gear width 735 mm , module 22 , Min. number of teeth 12 , distance between table and arbor supports 1475 mm , distance between table and centre of milling spindle 1185 mm , milling diameter / width 290 / 300 mm , cutter adjustment, automatic/manual 285 / 300 mm , Hob slide swivel 240 ° , Table dia / bore 1400 / 255 mm , Milling spindle speeds stepless 25 - 150 RPM , Axial feeds stepless 0,36 - 7,2 mm/rev, Radial feeds stepless 0,076 - 7,2 mm/rev, Tangential feeds stepless 0,076 - 7,2 mm/rev, Total power requirement 33 kW , Main drive 14 kW, Electric equipment 380 V 50 Hz, Machine dimensions 6200 x 3500 x 4000 mm Weight approx 26,7 t , Universal cutterhead Differential gear , Diagonal milling device , Downcut milling device , Rapid motions for column and slide movements , Motorized cutterhead swivel , Cutter coolant lubrication , 1962 Good Condition Photo
156 MA21233 Pfauter,German P1501 Workpiece Diameter - 1500 mm, Axial Travel - 600 mm, DP Module In Steel - 16 mm, Ctr Dist Between Workpiece & Hob Min. - 60 mm, Ctr Dist Between Workpiece & Hob Max. - 870 mm, Hob Diameter - 254 mm, Hob Length - 280 mm, Hob Travel - 254 mm, Work Table Diameter - 1200 mm, Table Weight Capacity - 11,000 LBS, Table Weight Capacity - 5000 kG, Dia Of Work Table Bore - 305 mm, Hob Speeds, Infinitely Variable- 30-180 RPM, Axial Feeds, Infinitely Variable - .020-.240 IPR, Axial Feeds, Infinitely Variable .5-6.000 mm/pr, Radial Feeds, Infinitely Variable .007-.084 IPR, Radial Feeds, Infinitely Variable .170-2.000 mm/pr, Tangential Feed, Infinitely Variable .008-.096 IPR, Tangential Feed, Infinitely Variable .200-2.500 mm/pr, main motor 15 kW, Weight Approximately - 41300 LBS. 1977 Good Condition Photo
157 MA21232 Liebherr L1500 Wheel dia- 1500 mm , Gear width- 575 mm , Module 15 , Table dia- 1075 mm , Table hole- 200 mm , Hob turning speeds- 29-174 U/min , Milling cutter dia- 220 mm , Cutter length- 220 mm , Feeds axial 0,6 - 7,4 U/m , Radial feed 0,1 - 1,5 mm/min , Total power requirement 17 kW , Machine weight- 16 tons , Dimensions of machine-5,5 x 2,3 x 2,8 m 1964 Good Condition Photo
158 MA21230 Gould & Eberhardt 72H Face Capacity Spur (Pinions & Gears) 609 mm,
Face Capacity 45 ,Degree Helical Gears (Std. Rated Pitch Hobs) 457 mm,
Maximum Diameter Spur Gear (W/Support) 1219 mm,
Maximum Diameter Spur Gear (No Support-Std. Rated Pitch Hobs) 2286 mm
Maximum Diameter 45 Degree Helical Gear (Std. Rated Pitch hob): 1828 mm
Minimum Center Work & Hob Arbors: 101
Maximum Diameter Hob: 273 mm
Diameter Work Table: 1016 mm
Additional Table dia.: 1500 mm
Diameter Index Worm Gear: 1219 mm
Index Range - Including Primes: 15-100
Index Range - Excluding Primes: 100-400
Hob Speeds: 6-100 RPM(14Steps)
Feeds (Range): 0.76~5 mm/min(12Steps)
Motor Requirements Machine: 15 HP
Floor Space: 2286 x 5257 mm
Height: 2921 mm
Net Weight Full Equipment: 38,000 kg


Good Condition Photo
159 MA21229 WMW Modul ZFWZ630 max. wheel dia 630/ 710 mm ,
gear width 400 mm ,
max. module 10 ,
min. module 1 ,
total power requirement 35 kW ,
weight of the machine ca 9,5 ton,
dimensions of the machine ca 3500 x 2500 x 2300 mm.


Good Condition Photo
160 MA21166 Russian 5A342P Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons . 1975 never used Photo
161 MA20993 Cugir,Romania 2 FD320, including sets of change gears
2 FD500, including sets of change gears
All machines are complete, in good technical condition.
Good Condition Photo
162 MA20984 WMW Modul ZFWZ1250/3 Max. Wheel dia : 1250 mm, Module : 2 - 14, Gear Width : 600 mm, Dia of hob : 240 mm, Table size : 1020 mm, Turning speed : 28-200 U/min, Feeds - Axial : 0.28 - 8 mm/min, Feeds - Radial : 0.1 - 2 mm/min, Feeds - Tangfential : 0.16 - 4 mm/min, Max. Workpiece length : 1000 mm, No. of teeth : 12 - 600, Table bore dia : 250 mm, Total power : 25 kW, Weight : 16 tons. 1977 Good Condition Photo
163 MA20983 WMW Modul ZFWZ1250x14II Max. Wheel dia : 1250 mm, Module : 2 - 14, Gear Width : 600 mm, Dia of hob : 240 mm, Table size : 1020 mm, Turning speed : 28-200 U/min, Feeds - Axial : 0.28 - 8 mm/min, Feeds - Radial : 0.1 - 2 mm/min, Feeds - Tangfential : 0.16 - 4 mm/min, Max. Workpiece length : 1000 mm, No. of teeth : 12 - 600, Table bore dia : 250 mm, Total power : 25 kW, Weight : 16 tons. Electric was modified with Klockner-Moeller relais, outer steady, Motor driven step by step hob shifting, Selection switch for various hobbing programs - radial / axial / tangential, 2 wooden boxes with change gears, arbors & other accessories. 1 Pallet with splash guards and housings, 1 palled with 2 consoles, 1 pallet with two chip boxes, 1 handbooks & manuals. 1975 Good Condition Photo
164 MA20972 WMW Modul ZFWZ 1250x14III wheel dia 1250 mm , gear width 600 mm , module 14 , min. module 2 , diameter of hob 240 mm , table surface area 1020 mm , turning speed range 28-200 U/min , feeds axial 0,28-8 mm/min , feeds radial 0,1-2 mm/min , feeds tangential 0,16-4 mm/min. support swivability left/rigth +/-45 , total power requirement 25 kW , weight of the machine 16 tons , dimensions of the machine ca. 4.5 x 2.1 x 3.3 m, With Change Gears. Good condition,under power Photo
165 MA20928 WMW Modul ZFWZ1250/3 Max. wheel diameter 1600 mm, gear width 600 mm, max. module 16, min. module 2, diameter of hob 240 x 280 mm, Table surface area 1020 mm, Turning speed range 28 - 200 U/min, feeds - axial 0,28 - 8 mm/min, feeds - radial 0,1 - 2 mm/min, feeds - tangential 0,16 - 4 mm/min, Support swivability - left/rigth +/- 45 °, main drive motor 5 / 19.5 kW, Rapid speed drive motor 12,5 kW, electrics - voltage/frequency 380 / 50 V/Hz, Total power requirement 25 kW, weight of the machine ca. 17,5 t, dimensions of the machine ca. 4,5 x 2,1 x 3,3 m, With universal hob head, shifting, outer steady, tangential hob head , chip conveyor
change gears, hob arbors, centres, toolings, 2-gg. gear box, with handbooks etc. partl. rebuilt 2000, with new electric cabinet with PLC control.
1979 Good condition,under power Photo
166 MA20926 Liebherr LC82 Module:3mm, Workpiece diameter:80mm, Axial travel:250(400mm), Shift Travel:180mm, Hob diameter:90mm, Hob length:210mm, Hob Speed (1/min):5,500
Equipped with Fanuc controls, autoloader, Work clamping, coolant system, auto-programming & auto cycle
Good Condition Photo
167 MA20886 Kolomna Russia 5355 Table diameter 4000 mm, Table hole 800mm Max. workpiece diameter:8000mm Min. workpiece diameter:500mm Max. workpiece weight:60 t Max. width of wheel:2000mmMax. module: 75 Accuracy class:H Spindle cone: Metric 100 Max. diameter of mill:400mm Max. length of mill:500mm Max. travel:2380mm(93.7") Distance between table and mill axis: Min:500mm, Max:4250mm Distance between table surface and mill axis: Min:820mm Max:3200mm Machine weight:192 t Dismantled,Good condition Photo
168 MA20857 Modul ZFWZ630 Max. dia 630 mm,
Max. module 10 mm,
1982 Good Condition Photo
169 MA20814 Shibaura HHR-5000 Table Diameter: 4340 Mm, Max. Working Diameter: 6000 Mm, Min. Working Diameter: 900 Mm, Max. Module: 26 - 27 , Max. Distance Between Center Of Hob Head And Center Of Table: 3007 Mm, Min. Distance Between Center Of Hob Head And Center Of Table: 750 Mm, Stroke Of Hob Head: 2300 Mm, Max. Diameter Of Hob Cutter: 280 Mm, Rpm Of Hob Cutter: 15 ~ 18, Max. Diameter Of Milling Cutter: 300 Mm, Length Of Hob Cutter: 350 Mm, Rpm Of Table: 0.5, Max. Loading Capacity Of Table: 70t, Height Of Machine: 6650 Mm, Width Of Machine: 5530 Mm, Length Of Machine(Front/Back): 10500 Mm, Weight Of Machine: 135,000 Kgs, In 2009 The Machine Was Retrofitted With New Wiring Of Nc System, Nc Control Was Replaced With Turbo Cnc Control, Servo Motors For Forward/Backward Travel And Indexing(Two Axes Are Controlled By Nc System). 1973 / 2009 Good condition,under power Photo
170 MA20771 Russian 5343 Max. Work piece dia 3200 mm,
Min. Work piece dia 300 mm,
Table dia. 1800 mm,
Max. Work piece Height 1250 mm,
Max Module 30
machine dimensions 9570 x 3780 x 5170 mm, mass of standard machine (including mass of foundation hardware and electrical equipment) 84 tons
1967 Good Condition Photo
171 MA20769 Schiess,German RF30S Max dia of workpiece 3000 mm,

Min dia 50 mm,

Module - 12,

Max face width - 1300 mm,

Faceplate capacity 25 tons,

Max distance between hob and table axes 1600 mm,

Min distance between hob and table axes 100 mm,

Ext/ dia of table 2200 mm,

Max hob dia 340 mm,

Spindle RPM 9-100,

Spindle feeds 0.08-4 mm/rev,

Column feeds 0.16-8 mm/rev,

Number of feeds 18,

Fast feed of hob 170 mm/min,

Fast feed of column 400 mm/min,

Main motor capacity 30kW,

1978 Good Condition Photo
172 MA20765 Lorenz E60 Max.work piece dia. 6800 mm,
Max.table load 40000 kg.
Max.module with - end mill cutter head in cast iron 45
- disc milling cutter in cast iron 40,
- cutter head in cast iron 30,
Max. number of teeth 500,
Min./Max distance between arbor and cutter center 800/3530mm,
Max. vertical stroke of slide 1425 mm,
Clamping table dia. 3250 mm,
Table bore dia.680 mm,
Mandrel dia.200 mm,
Max. counter bore pin length from the top of the faceplate with a diameter of 675 mm at the top of the arbor 1500 mm,
Speed of hob cutter (18 steps)9.6-68rpm,
Number of strokes per table rotation 0.04-4,
Table connected load approx..27Kw,
Voltage 220/380V. 50Hz,
Weight of the machine approx.75000 kg.
Equipment and accessories :

-104 index gears

-47 differential gears

-7 milling spindles (usually a set of milling spindles contains 5 spindles only)

-Types of milling spindles: 62, 40, 50, 60, 80 including bushing sleeve and bearing

-1 additional special table

-7 thrust bearings

-8 clamping segments for the small table

-Machine is equipped with single indexing device
1965/1991 Good Condition Photo
173 MA20759 Pfauter,German P1501 Workpiece Diameter - 1500 mm, Axial Travel - 600 mm, DP Module In Steel - 16 mm, Ctr Dist Between Workpiece & Hob Min. - 60 mm, Ctr Dist Between Workpiece & Hob Max. - 870 mm, Hob Diameter - 254 mm, Hob Length - 280 mm, Hob Travel - 254 mm, Work Table Diameter - 1200 mm, Table Weight Capacity - 11,000 LBS, Table Weight Capacity - 5000 kG, Dia Of Work Table Bore - 305 mm, Hob Speeds, Infinitely Variable- 30-180 RPM, Axial Feeds, Infinitely Variable - .020-.240 IPR, Axial Feeds, Infinitely Variable .5-6.000 mm/pr, Radial Feeds, Infinitely Variable .007-.084 IPR, Radial Feeds, Infinitely Variable .170-2.000 mm/pr, Tangential Feed, Infinitely Variable .008-.096 IPR, Tangential Feed, Infinitely Variable .200-2.500 mm/pr, main motor 15 kW, Weight Approximately - 41300 LBS. Good Condition Photo
174 MA20712 Russian BCH350NC22 Maximal diamter of spur geat ot be treated:500mm, Maximal module to be treated: 10mm,maximal helix angle of teeth to be cut, deg:45, diameter of workpiece spindle:250mm, Distance between the tool axis and the table axis:30/350mm, MAximal diameter of hobs to be installed, diameter: 160mm, length:230mm,Maximal hob travel along the axis (shifting):170mm,range of numbers of hob revolutions: 75 up to 400 rpm, range of axial feeds: frm 3 up to 750 incl, range of radial feeds: form 3 up to 600 incl, range, value of hob rapid tangential travels:145mm/min, number of coordinatew to be controlled:3, overall dimensionsL 3485x2160x2335mm, weight of the semiautomatic machine:9500kg.Cycle time: 12,7 mins(approx 5pcs/hr). Delivery time: 5 months Good Condition Photo
175 MA20705 Russian 5K328 dia with support 850mm,

dia without support 1350mm,

Max. Module 12mm,

Max. face width of spur gear 560mm,

Min. number of teeth machined 20mm,

Max. mass if gear blank machined 2000 kg,
,
Table working surface 935mm,

Main Motor 10 kW,

Dimensions: 3560 x 1760 x 2590mm,

Total weight 14 tons .
1971 Good Condition Photo
176 MA20579 Russian H3222 1984 Good Condition Photo
177 MA20578 Russian 5D312 Vertical 1985 Good Condition Photo
178 MA20563 Russian 5A342 Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons. Good Condition Photo
179 MA20517 Stanko-Russia 53A50H Max. diameter 700 mm,
Table diameter 500 mm,
Good Condition Photo
180 MA20474 Nihonkikai NDH1200 Max. Diameter of Gear to be cut (w/o support) 1250 mm,
Max. Diameter of Gear to be cut (w/support) 768.75 mm,
Max. Pitch of Gear to be cut 2.5 DP
Travel Distance of Hob Saddle 540.625 mm,
Distance between Arbor Centers 59.375 mm,
- with crowning attachments 709.375 mm,
Hob Spindle Speed (stepless) 36-180 RPM
Max. Diameter of Hob Used 200 mm,
Max. Length of Hob Used
Diameter of Hob Arbor (standard accessory) 31.25 , 26.56 mm,
Shifting Distance of Hob Head 98.43 mm,
Diameter of Table 768.75 mm,
Diameter of Table Hole 128.125 mm,
Diameter of Work Arbor (Std. Equipment) 43.75 mm,
Floor Area for Installation 3168.75 x 1565.625 mm,
Weight 21,560 lbs
Voltage 460-60
Machine is equipped with:
Misc Tooling
Misc Change Gears
Books/Manuals
1974 Good Condition Photo
181 MA20472 Pfauter,German P630 Maximum Workpiece Diameter 625 mm,
Maximum Pitch Module 3 DP
Maximum Axial Traverse 437.5 mm,
Minimum Center Distance 50 mm,
Hob Speed Control 62-390 RPM
MACHINE IS EQUIPPED WITH THE FOLLOWING:
Change Gears
Differential
Arbor

1970 Good Condition Photo
182 MA20353 Pfauter-Kapp Max workpiece diameter-1800 mm, Max diameteral pitch at this- 63.5 mm, Face-560 mm, Max workpiece diameter: Work standard- 700 mm, Work support and overarm-750 mm, Max hobbing length: At workpiece diameter upto 600 mm- 450 mm, At workpiece diameter more than 600 mm- 580 mm, Dia of the work table(incl oil channel)- 1000 mm, Diameter of table bore- 160 mm, Diameter of work arbor- 60 mm, Max hob admissible- 210 mm, Axial distance between hob and workpiece: Max distance- 1050 mm, Min distance- 600 mm, Max hob shifting- 150 mm, Working voltage(3 phase current)- 190,220,280,380, Frequency- periods 50, Total input- 19 HP, Main drive motor- 10 HP 1440 RPM, Rapid motion motor- 3 HP 1400 RPM, Motor for coolant pump- 1.5 HP 2880 RPM, Control coltage- 220 volts, Weight of standard machine w/electrical equipment and normal accessories approximate- 12.5 tons, Space required of the machine with opended doors(lengthxwidthxheight)- 3800mmx2200mmx2700mm Good Condition Photo
183 MA20351 Russian 5K328A Gear dia 1250 mm, modul 12 mm, max. tooth length of cutting wheel 560 mm, overall dimensions 3580 x 1790 x 2590 mm, main motor 10 kW, total weight 14 tons Excellent Photo
184 MA20239 Russian 5A342 Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons. 1968 Good Condition Photo
185 MA20179 Tos Czech FO6 Max. dia if workpiece 800mm,Modul 6,max. dia. of milled wheel 800mm,main motor output 7 kW,Dimension of machine L2540mmxW1400mm,Machine wt. 4 tons approx. Good Condition Photo
186 MA20139 WMW Modul ZFWZ3150 x 30 Max. diameter of gear - 3150 mm, Size of table - 2400 mm, Max. modul - 30, Max. weight of detail - 30000 kg. Good Condition Photo
187 MA20123 Pfauter,German Max. wheel diameter - 250 mm, Gear width - 250 mm, Min./max. module - 1/6, EQUIPPED WITH: change gears. 1980 Excellent Photo
188 MA20105 ZFWZ630 Max. wheel diameter - 630,710 mm, Gear width - 400 mm, Max. module - 10, Min. module - 1, Total power requirement - 35 kW, Weight of the machine ca. - 9,5 ton, dimensions of the machine ca. - 3,5 x 2,5 x 2,3 m. Good Condition Photo
189 MA20014 WMW Modul ZFWZ2000/3 Max. work dia. with outer column - 1450 mm, Max. dia. with outer column withdrawn - 2590 mm, Min. dia. with - 375 dia. hob: 355 mm, Min. dia. with 12" dia. hob: 465 mm, Max. tooth width for axial hobbing with straight toothing: 1060 mm, Helical toothing @ 15 deg.: 1016 mm, Helical toothing @ 45 deg.: 762 mm, Max. tooth width for radial axial hobbing: 45 deg, Max. DP with hobbing: 1 DP, Single milling: 3/4 DP, Max. angle of tooth: 45 deg, Smallest number of teeth per teeth cut: 10, Max. hob dia. with standard hob head: 300mm, Max. hob length: 330 mm. Very good condition Photo
190 MA19971 Stanko-Russia 5K32P Max.working diameter: 800 mm,
Max. module: 10,
Gear width: 350 mm,
Dimensions: 2650 x 1450 x 2000 mm,
Weight: 7200kg.
1970's/2009 Good condition,under power Photo
191 MA19970 Pfauter,German P900 Max. Working diameter: 900 mm,
Max. Module: 10,
Max. Face width: 500 mm,
Minimum number of teeth (single start): 8,
Minimum number of teeth (double start): 4,
Min./ Max. Distance table to outer steady: 465/ 910 mm,
Min./ Max. Distance table to hob spindle: 50/ 550 mm,
Max. Hob diameter: 192 mm,
Max. Hob width: 220 mm,
Cone of hob arbor: MK 5,
Max. Hob shifting: 200 mm,
Diameter of table: 698 mm,
Diameter of table bore: 160 mm,
Hob speeds, infinitely variable: 60 - 300 RPM,
Feeds - axial: 0, 40-6, 3 mm/rev,
Radial: 0, 1-1, 60 mm/rev,
Tangential: 0, 14-2, 24 mm,
Voltage: 380/3/50,
Main drive motor: 11 kW,
Total power required: 20 kva,
Approximate weight: 8.5ton (18,743 Lbs.)

Good Condition Photo
192 MA19943 WMW ZFWZ1250 max. wheel diameter 1250 mm,

gear width 600 mm,

max. module 14,

min. module 2,

diameter of hob 240 mm,

table surface area 1020 mm,

turning speed range 28-200 U/min,

feeds - axial 0,28 - 8 mm/min,

feeds - radial 0,1 - 2 mm/min,

feeds - tangential 0,16 - 4 mm/min,

support swivability - left/rigth +/- 45,

electrics - voltage/frequency 380/50 V/Hz,

total power requirement 25 kW,

weight of the machine ca. 16 t,

dimensions of the machine ca. 4,5 x 2,1 x 3,3 m.



Good Condition Photo
193 MA19938 Russian 5359 Work piece dia 1200 mm, module 12. 1967 Good Condition Photo
194 MA19931 Russian 5343 Diameter of workpiece :
Min : 500 mm,
Max : 3200 mm,
Table diameter : 2800 mm,
Max module :
Gear worm : 26,
Gear plate : 30,
Max gear length : 425 mm,
Distance axis cutter-axis table : 300 x 2150 mm,
Distance axis cutter table surface : 700 x 100 mm,
Max workpiece weight : 40000 kg,
Max corner of an inclination of a tooth : 45 degree,
Number of hobbing spindle revolution (stepless control) : 100 rev/mm,
Horizontal feed number : 18,
Vertical feed number with plate gear : 15,
Main motor power : 25 kW,
Dimension :
Length : 9570 mm,
Width : 3780 mm,
Height : 5170 mm,
Machine weight : 84000 kg.
1968 Good Condition Photo
195 MA19840 Russian 5A342P Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons , with internal gear cutting attachment at extra cost - 2 pcs. 1984 Complete ,good working condition Photo
196 MA19784 Russian 5A342P Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons . 1980 Good Condition Photo
197 MA19736 WMW Modul ZFWZ800/3 table diameter: 690 mm, weight approx.: 10000 kg, control: knoventionell, max. module: 3 /10, max. wheel diameter: 800 mm, workpiece length - max.: x mm, hobbing width: 500 mm, hob turning speeds: 40 - 280 U/min, shifting: 150 mm, milling head -swivable +/-: 45 °, Dimension of the machine l/w/h: 3,5 x 2 x 2,3 m, Total power requirement: 20 kW, change gears, arbors, chip remover, coolant attachment, manual books, housing. 1976 Good Condition Photo
198 MA19730 Russian 5K324A Max gear diameter: 500mm, Max tooth helix angle: 60 degrees, Max module of gear: 8mm, Max face width of gear: 300mm, Max nos of gear tooth: 12 nos, No of hob spindle rotations: 9 nos, Range of hob spindle rotations: 50-310rpm, Main motor power: 7.5kw, Dimension: 2500x1440x2000mm, Weight: 6.4 tons. 1974 Good Condition Photo
199 MA19636 Pfauter,German RA200 wheel dia 203 mm, Max. helix angle of tooth: 40 degree , Min. number of teeth to be hobbed, -Standard (1-start index drive): 6(9) , -Special (2-start index drive): 4 , Max. number of teeth to be hobbed: 48(72) , DIMENSIONS: Center distance between workpiece and hob , -Min.: 11 mm , -Max.: 140 mm , Diameter of work table: 220 mm , Diameter of table bore: 62 mm , Bore of table bushing: 72 mm , Diameter of hob arbors (1 included with machine): 21 mm, 24 mm, 19 mm, 11 mm , Hob spindle taper: Morse 4 , Max. hob dimensions: , -Diameter: 124 mm , -Length: 176 mm , Max. hob shift-manual or automatic: 110 mm , Hob speed-adjustable from: 80 - 500 R.P.M. , ELECTRIC SPECIFICATIONS Voltage (standard): 220/380 volts , Frequency (standard): 50 Hz , Rated output of main motor: 10 HP , Total power consumption Of machine: 16.5 kVA , WEIGHT AND SPACE REQUIRED: Weight of the machine: 7 ton , Dimensions of the machine: 3600x2000x2400 mm . 1967 Good Condition Photo
200 MA19612 Russian 5K328 Gear dia 1250 mm, modul 12 mm, max. tooth length of cutting wheel 560 mm, overall dimensions 3580 x 1790 x 2590 mm, main motor 10 kW, total weight 14 tons 1970 Good Condition Photo
201 MA19611 Russian 5A342 Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons.
Qty : 2 nos.
1966 / 1974 Good Condition Photo
202 MI5269 WMW ZFWZ250/4 Dia. : 250 mm,
Module : 6,
with all change gears, cutter arbors, work arbors, tooling, chip conveyor, manuals etc.
Perfect Condition Photo
203 MA19595 Russian 53A11 Maximum dia of gears to be machined :
without support 1250 mm,
with support 800 mm,
Maximum module of gears to be cut 16 mm,
Min. number of teeth to be cut 12 ,
Diameter of table1000 mm , Maximum tooth inclination angle of gears to be hobbed, deg. +-/45 ,
Distance between the axes of table and hob 100-750 mm,
Distance from table plane to hob axis 235-835 mm,
Max. dimensions of hob to be set ::
length 250 mm,
diameter 225 mm,
Maximum length of hob slide vertical travel 650 mm ,Hob slide hole cone ( Morse) 6 ,
Max. axial hob travel length 245 mm,
Hob slide rotation speed 28-270 rev/min,
Feed , mm/min:
vertical (0,15-40)* ,
radial (0,06-17,2)* ,
tangential (0,04-19,2)* ,
Main motor power 13/15 kW,
Overall machine dimensions: 4020 x 2350 x 2780 mm ,

Mass of the machine 17.9 tons - 3 machines
1993 Good Condition Photo
204 MA19593 Pfauter,German dia 1800 mm, modul 18. 1971 Good Condition Photo
205 MA19592 Schiess,German RF30/20MS max gear dia 3150 mm, max number of teeth cut 750 , min no of teeth 32 cut, max gear module 12 mm, faceplate dia 2200 mm, max job weight 10 tons , man motor power 24 kw, 1976 Good Condition Photo
206 MA19579 Craven,UK 6000 Table diameter - 3048 mm, Maximum diameter gear - 6000 mm, Maximum tooth pitch - M50, Vertical stroke of hob slide - 1524 mm, Maximum diameter hob cutter - 560 mm, Column traverse on bed - 3000 mm, Overall dimensions (L/W/H) - 11400 x 4400 x 5500 mm, Width of gear (approx): 1200 - 1300 mm, Weight - 110 tons, Full set of change gears. 1960 Retrofitted 1991 Good Condition Photo
207 MA19549 Pfauter,German P1501 Workpiece Diameter - 1500 mm, Axial Travel - 600 mm, DP Module In Steel - 16 mm, Ctr Dist Between Workpiece & Hob Min. - 60 mm, Ctr Dist Between Workpiece & Hob Max. - 870 mm, Hob Diameter - 254 mm, Hob Length - 280 mm, Hob Travel - 254 mm, Work Table Diameter - 1200 mm, Table Weight Capacity - 11,000 LBS, Table Weight Capacity - 5000 kG, Dia Of Work Table Bore - 305 mm, Hob Speeds, Infinitely Variable- 30-180 RPM, Axial Feeds, Infinitely Variable - .020-.240 IPR, Axial Feeds, Infinitely Variable .5-6.000 mm/pr, Radial Feeds, Infinitely Variable .007-.084 IPR, Radial Feeds, Infinitely Variable .170-2.000 mm/pr, Tangential Feed, Infinitely Variable .008-.096 IPR, Tangential Feed, Infinitely Variable .200-2.500 mm/pr, Weight Approximately - 41300 LBS. 1976 Good Condition Photo
208 MI5265 Stanko-Russia Table dia. : 300 mm,
Max. Module : 6,
Control : PLC Attached (Messung make).
Excellent Photo
209 MA19536 Russian 5353 gear dia capcity 3200 mm, min gear dia capacity 1900 mm, dia of external gear machines 500 mm, module of gear machined : with hob 30 mm, with module milling cutter 35 mm, length of milling : with vertical feed 1200 mm, with radial feed 1350 mm, tooth helix angle +- 45 deg, mass of gear blank machined (including fixture) 40 tons, dia of table working surface 2800 mm, dia of table hole 650 mm, number of T slots : radial 6, parallel 12, distance between table surface and tool spindle axis : min 700 mm, max 2100 mm, aggregate power of electric motors installed 40kW, machine dimensions 9570 x 3780 x 5170 mm, mass of standard machine (including mass of foundation hardware and electrical equipment) 84 tons Complete ,good working condition Photo
210 MA19359 Gould & Eberhardt Modul: 1-16,
Diameter: 150-2500 mm,
Max gear widht: 600 mm,
Machine weight: 14ton,
Lenght: 4870 mm,
Widht: 2200 mm,
Height: 3300 mm,
Overhauled in 1985 Good Condition Photo
211 MA19344 Tos Czech FO10 Max module 10,
Max gear diameter 1000 mm,
Max diameter with tailstock 750 mm,
Max width of tooth 400 mm,
Table diameter 850 mm,
Hole in table 100 mm,
Milling speed 20 - 125 U/min,
Min/max height of the cutter from the table 280 mm / 740 mm,
Milling spindle taper MORSE 5,
Vertical feed 0,2 - 6,00 mm /min,
Longitudinal feed 0,05 - 1,50 mm /min,
Tangential feed 0,133 - 4,0 mm /min,
Main motor power 10 kW,
Dimensions Length 3,120 m , Width 1,840 m ,
Machine weight 9,36 t

- 2 nos
1975 Good Condition Photo
212 MA19337 Russian 5V373P Dia. of gear machine : 80-800 mm,
Max. length of pinion machin 4000 mm,
Max. module of gear machine :
With hob - 30,
With module milling cutter - 35,
Number of teeth machine : 6-385,
Max. tooth helix angel +/- 45 deg.,
Taper of milling spindle hole : Metric 80,
Max. dimensions of cutting tool :
Dia. - 360 mm,
Length - 425 mm,
Dia of milling arbors 60;80;100,
Range of miolling spindle rotation frequencies 10-60 min-1,
Range of hob feeds per workpiece revolution 0.3-16 mm,
Main drive DC motor power 25kW,
Main drive DC motor rotation frequency 300-1500 min-1,
Aggregate power of electric motors installed 33.17 kw,
Machine overall dimensions 8800 x 3700 x 2950 mm,
Weight 48000 kg.
1977 Good Condition Photo
213 MA19314 Pfauter-Kapp P630 Maximum diameter to machine 630 mm,
Module 8,
Min. Teeth number 8,
Maximum width to hob 410 mm,
tangential travel of the milling cutter 200 mm,
Table diameter 550 mm,
Bore in the table 125 mm,
maximum hob diameter 192 mm,
Maximum length 215 mm,
Distance entre la fraise et la pièce 50/425 mm,
Variable milling cutter speed (infiniment) 45 à 280 tr/mn,
Feeds 0,10 à 6,80 mm/tr,
Motor 10 cv,
Approximate weight 7600 kg,
Dimensions 3000x2000x2075 mm.
With - Taillage radial, axial, tangentiel, diagonal, shifting.
Accessories :
- Visu 2 axes,
- Arbre porte-fraise,
- Arbre porte-pièces,
- Cycle 2 passes,
- Convoyeurs à copeaux,
- Déplacement automatique de la fraise.
Good Condition Photo
214 MA19313 Tos Czech OFA32A Maximum diameter to machine 320 mm,
Module 7,
Number of teeth 9-200,
maximum hob diameter 150/200 mm,
Table diameter 300 mm,
Milling cutter axial stroke 150 mm,
Bore in the table Ø 80 profondeur 750 mm,
Number of speeds 17,
Variable milling cutter speed 71 à 450 tr/mn,
Radial feed 0,5 à 25 mm/mn,
Axial feed 1 à 220 mm/mn,
Tangential feed 0,26 à 50 mm/mn,
Motor 7,5 kw,
Approximate weight 5500 kg.
Dimensions 2520x2390x1820 mm.
Good Condition Photo
215 MA19298 Russian 5K32A Max.working diameter 800 mm,
Max. module 10,
Gear width 350 mm.
1973 Good Condition Photo
216 MA19253 Heidenreich & Harback 75KH Biggest Wheel diameter - 750 mm, Most of taper length - 400 mm, Module 3 and Module 20 (spur), Weight - 8 tons. 1952 Good Condition Photo
217 MA19252 Liebherr S5V Module - 6, Pitch Circle Diameter - 500 mm, largest module - 6, max. Workpiece diameter with overarm - 500 mm, max. Workpiece diameter without overarm - 800 mm, max. Workpiece - 360 mm, Table diameter - 550 mm, max. Cutter diameter - 160 mm, max. Mills Length - 130 mm, Total connected load - approx 11KW, Floor space (LxWxH): 3.3 x 1.8 x 1.9 m, Weight approx 5.6 tons. 1996 Revised Good Condition Photo
218 MA19251 Liebherr L300 largest module - 4.5, smallest number of teeth - 6, max. Workpiece diameter - 300 mm, max. Workpiece - 200 mm, Table diameter - 315 mm, max. Cutter diameter - 125 mm, max. Mills Length - 105 mm, Total Power input - 9 kW, Floor space (LxWxH): 2.1 x 1.1 x 1.8 m, Weight about 4 tons. 1965 Good Condition Photo
219 MA19249 Liebherr L902 Module: 10 (-14), Pitch Circle Diameter - 740 mm 1982 Good Condition Photo
220 MA19243 WMW Modul ZFWZ250/3 Work Dia - 250, Module - 6.

1989 Excellent Photo
221 MA19212 Russian 5A342P Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons. 1989 Complete,working condition Photo
222 MA19197 Shibaura J.E. Reinecker AG Chemnitz dia 2400 mm. Good Condition Photo
223 MA19182 Tos Czech FO10 Max. diameter of workpiece 1250 mm,
Modul 10 ,

Main motor output 7.5 kW,
Dimensions 3120 x 1870 x 2525 mm,
Machine weight 8700 kg
Complete ,good working condition Photo
224 MA19146 Russian Table dia. - 950 mm, Max workpiece dia. - 1000 mm, Max. Modul 20, Full set of change gears Hob arbors - 4

Good Condition Photo
225 MA19116 TOS Volman FO25 Max module 25,
Max diam. of the gear 2500mm,
Max diam. of the gear with outboard support 1300mm,
Distance between axis of a spindle and camping arbor 80-1630mm,
Max diam. of the gear by tangential method 10 grades 2400/800mm,
Max diam. of the gear by tangential method 60 grades 500/700mm,
Max number of teeth with standard change gears 448,
Max face over 1500mm diam. of the gear 800mm,
Max face under 1500mm diam. of the gear 750mm,
Max hob diam. 340mm,
Max hob length 500mm,
Revolutions steps 8,
Revolution of hob per min 12, 5-63,
Table surface diam. 1500mm,
The main motor power 14kW.
1957 Dismantled Photo
226 MA19114 Russian 5343 gear dia capcity 3200 mm, min gear dia capacity 1900 mm, dia of external gear machines 500 mm, module of gear machined : with hob 30 mm, with module milling cutter 35 mm, length of milling : with vertical feed 1200 mm, with radial feed 1350 mm, tooth helix angle +- 45 deg, mass of gear blank machined (including fixture) 40 tons, dia of table working surface 2800 mm, dia of table hole 650 mm, number of T slots : radial 6, parallel 12, distance between table surface and tool spindle axis : min 700 mm, max 2100 mm, aggregate power of electric motors installed 40kW, machine dimensions 9570 x 3780 x 5170 mm, mass of standard machine (including mass of foundation hardware and electrical equipment) 84 tons Good Condition Photo
227 MA19065 Stanko-Russia 5K329 Max. Working Diameter - 800 mm, Max. Module - 10 Overhauled in 2009 Good Condition Photo
228 MA19034 Russian 5A342P Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons - 2 machines 1981,1984 Complete ,good working condition Photo
229 MA19024 WMW Modul ZFWZ800 x 10 approx 40 change gears 1978 Good Condition Photo
230 MA19023 WMW Modul ZFWZ630 x 10 approx 40 change gears 1975 Good Condition Photo
231 MA18996 Lorenz E30 Dia 2000 mm,
Modul 30,
Gear width 1200 mm,
Table dia.1500 mm.
Good Condition Photo
232 MA18983 Lansing GH50 Diametral Pitch Rating, Maximum 2 DP,
Workpiece 1260 mm, Table Load Capacity 6614 LBS,
Gear Width, Maximum 443.75 mm, Hob Diameter, Maximum 215.625 mm, Hob Lenth, Maximum 215.625 mm, Hob Speeds, Range 18 to 185 RPM,
Motor, Horsepower, Total 30 HP
Weight, Approximately 26500 LBS, EQUIPPED WITH:
Differential Mechanism
Good Condition Photo
233 MA18932 Russian E3C646.31 Maximum dia of gears to be machined : without support 1250 mm, with support 800 mm, Maximum module of gears to be cut 16 mm, Min. number of teeth to be cut 12 , Diameter of table1000 mm , Maximum tooth inclination angle of gears to be hobbed, deg. +-/45 , Distance between the axes of table and hob 100-750 mm, Distance from table plane to hob axis 235-835 mm, Max. dimensions of hob to be set :: length 250 mm, diameter 225 mm, Maximum length of hob slide vertical travel 650 mm ,Hob slide hole cone ( Morse) 6 , Max. axial hob travel length 245 mm, Hob slide rotation speed 28-270 rev/min, Feed , mm/min: vertical (0,15-40)* , radial (0,06-17,2)* , tangential (0,04-19,2)* , Main motor power 13/15 kW, Overall machine dimensions: 4020 x 2350 x 2780 mm , Mass of the machine 17.9 tons. 1991 Good Condition Photo
234 MA18920 Russian 53A11 Maximum dia of gears to be machined : without support 1250 mm, with support 800 mm, Maximum module of gears to be cut 16 mm, Min. number of teeth to be cut 12 , Diameter of table1000 mm , Maximum tooth inclination angle of gears to be hobbed, deg. +-/45 , Distance between the axes of table and hob 100-750 mm, Distance from table plane to hob axis 235-835 mm, Max. dimensions of hob to be set :: length 250 mm, diameter 225 mm, Maximum length of hob slide vertical travel 650 mm ,Hob slide hole cone ( Morse) 6 , Max. axial hob travel length 245 mm, Hob slide rotation speed 28-270 rev/min, Feed , mm/min: vertical (0,15-40)* , radial (0,06-17,2)* , tangential (0,04-19,2)* , Main motor power 13/15 kW, Overall machine dimensions: 4020 x 2350 x 2780 mm , Mass of the machine 17.9 tons. 1987 Complete ,good working condition Photo
235 MA18915 Tos Czech F010 Max module- modul 10, Max diameter of workpiece- 1000 mm, Max diameter of workpiece including steady- 750 mm, Wheelwidth- 400 mm, Milling diameter- 170 mm, Tablesize- 850 mm, Hole in table -100 mm, Machineweight- 936 tons, Main power- 10 PS, Including 1 Axis DRO SONY, Including change gear, Including toolstaper, Including manual Very good condition Photo
236 MA18908 Tos Czech F010 Dia-1000 mm, Module-10 Good Condition Photo
237 MA18892 Lorenz DE40 Lenght x widht x height: 9000x3500x3300mm,
Installed power: 14kW,
Max. incise module: 25mm,
Max. workpiece diameter: 4000mm,
Max. widht gear hobbing; 1000mm,
Max. milling widht: 800mm,
Nominal voltage: 3x380V/220V,
Mass: 8000kg.
Good Condition Photo
238 MA18867 Pfauter,German P630 Work capacity:max. diameter 630 mm,
max. module 10,
max. gear wheel width 375 mm,
Pitch min. 8,
Axes distance between workpiece
and tool:
min. 50 mm,
max 425 mm,
Diam. of the clamping table 550 mm,
Diameter of the table drill 125 mm,
Gear hob:
max. diameter 192 mm,
min. diameter 215 mm,
Max. milling cutter displac. 200 mm,
Milling cutter speeds:
from 62 rpm,
up to 390 rpm,
Feeds:
axial from 0.40 mm/r,
up to 6.80 mm/r,
radial from 0.1 mm/r,
up to 1.76 mm/r,
Voltage 50 Hz 3x 380 Volt,
Power 7.5 kW,
Total power required 21 kVA,
Machine''s weight about 8200 kg.
With Set of gears,
Set of cutter arbors,
Chip conveyor,
Dust extraction.
Good Condition Photo
239 MA18851 Churchill,UK PH3615 Max. work piece diameter 915 mm

Module 8,5,
Tail stock and full set of change gears available.

1985 Good working condition Photo
240 MA18814 Modul ZFWZ 5000 x 40 Work dia - 5000 mm, Modul - 40, Work weight - 60 Ton, Weight of machine - 125 Ton. 1965 Good condition,under power Photo
241 MA18781 Belarus 53B30P Size - 320 mm, 6 - module. Brand New Brand New Photo
242 MA18779 Nihonkikai NTM15B max dia 400 mm, max module 5, max length 1500 mm. 1989 Good Condition Photo
243 MA18775 Belarus BCH150NC22 Workpiece dia. : 500 mm. Brand New Brand New Photo
244 MA18773 Belarus BCH350NC22 Size - 500 mm, Module - 10.
Brand New Brand New Photo
245 MA18748 WMW Modul ZFWZ3150 x 30 Dia 3100 mm max. working dia 3150 mm max. module 30 mm table dia 2400 mm max. load on table 30 tons 1967 excellent working condition Photo
246 MA18707 Hurth,Germany WF300 Max. workpiece diameter - 315 mm, Module - 8 mm, Control SIN -880M, X- 210 mm, Y-240 mm, Z- 360 mm, Milling head -swivable +/- 45 °, Diameter of hob max. -175 mm, Milling spindle turning speed range -100 - 800 U/min, Workpiece turning speeds 0,2 - 55 U/min, Distance milling spindle - workpiece 40 - 250 mm, Dist. milling spindle - table surface 210 - 570 Grad, Number of working hours 31.999 h, 35 KVA, Main drive 14,00 Kw, Feed range 0,1 - 1000 mm/min, Rapid traverse radial 5.000 mm/min, Rapid traverse axial 5.000 mm/min, Rapid traverse tangential 3.000 mm/min, Total power requirement 25,00 Kw, Weight of the machine ca. 10,00 t, Dimensions of the machine ca. 3,10 x 2,40 x H2,60m. 1995 Good Condition Photo
247 MA18706 Liebherr LC182HSC Max. wheel diameter -180 mm, gear width -230 mm, max. module -7, control - Liebherr MPST, table diameter- 180 mm, milling slide swivelling +/- 45 Grad, milling head speed 120 - 1200 U/min, table load - 1,80 t, no. of teeth to be hobbed min. 4 mm, tool taper HSK-A 63, Number of working hours 52318 h, diameter of hob max. -160 mm, total power requirement 40,00 kW, weight of the machine ca. 12,00 t, dimensions of the machine ca. 3,70 x 2,80 x H2,70m. 1995 Good Condition Photo
248 MA18689 Gould & Eberhardt 48HS Maximum Diametal Pitch (Steel) 2,
Table dia 800 mm,
Face Capacity 400 mm,
Maximum Diametal Spur Gear(With Support 800 mm, Maximum Diametal Spur Gear(No Support 1200 mm, Maximum Hob Diameter 200 mm,
Index Worm Gear Diameter, Hob Speeds Range...........................................22-130 RPM
Number12,
Floor Space 2050 x 3750 mm, Height 2400 mm, Weight Net Weight (approximate)............................
EQUIPPED WITH:

Hob Arbor Coolant System+
Setup Of Change Gears Arranged For 220-230 Or 440-480 Volt Motor+
110 Push Button Control Not Equipped With Tailstock

Good Condition Photo
249 MA18675 WMW Modul ZFWZ800 x 10/II Maximum wheel diameter- 800 mm, Maximum gear Width- 410 mm, Maximum Module- 10 Mod, Maximum hob diameter- 195 mm, Table diameter- 700 mm, Power capacity- 12.5 kW, Weight Net weight- 22,000 Lbs, Equipped with 1.25 Hob arbor, Chip conveyor, Auto cycle, Splash guards, Change gears 1970 Good Condition Photo
250 MA18674 Gould & Eberhardt 36H Maximum travel of hob slide- 600 mm, Maximum diameter (spur gear with support)- 600 mm, Maximum diameter (spur gear wtihout support)- 900 mm, Minimum centers work and hob arbors- 75, Maximum diameter hob- 200, Diameter work table- 600, Floor space-2075x4100, Height wtihout overarm- 2225, Height with overaarm- 2525 Good Condition Photo
251 MA18670 Gould & Eberhardt 24H Maximum part centered-850 mm, Maximum diameter spur gear (with support)-450 mm, Maximum diameter spur gear (no support)- 600 mm, Maximum diameter hob- 450 mm, Diameter index worm gear- 450 mm, Tail stock with center, Set up of change of gears, Coolant system, Ratio 10/T, LUB System, Full Load 12 AMPS AT 440 VOLT, 110 Push button control, Note the motor and control had been updated Good Condition Photo
252 MA18668 Liebherr L301 Maximum Pitch For Hobbing Steel 4,25 DP
Maximum Workpiece Diameter 300 mm,
Travel Of Hob Head Carriage 225 mm,
Work Table Diameter 215 mm,
Hob Spindle Centerline Above Machine Table 165 mm Minimum,
Maximum Length Of Workpiece 680 mm,
Infinitely Variable Radial Feed 0.9906 - 1198 mm/Minute
Rapid Traverse Of Hob Slide 960 mm/Minute
Weight Of Machine 14,000# Approx
Maximum Hob Length 150 mm, Maximum Hob Diameter 140 mm,
Maximum Hob Shift Or Tangential Travel 150 mm,
Hob Head RPM, Infinitely Variable 80 - 640.
Equipped With :
Tailstock, Coolant,
Chip Conveyor, Change Gears - 2 Set Ups,
Two Cut Cycle, Crowning,
Differential, Willy Vogel Lubrication,
Auto Hob Shift,
440 3ph 60 Cycle,
Climb Hobbing.
Good Condition Photo
253 MA18666 Pfauter,German P400 Max. Workpiece Diameter 406 mm,
Max. Dp in Steel 3,
Face Capacity 305 mm,
Max. Center Distance Between Workpiece & Hob 470 mm,
Max. Distance Work Table to Tailstock Center 635 mm,
Max. Hob Diameter 152 mm,
Max. Length of Hob 152 mm,
Max. Adjustment of Hob Spindle (Auto/Manual) 102/114 mm,
Max. Swivel of Hob Slide 240 Deg.,
Diameter Work Table 394 mm,
Diameter of Hole in Work Table 76 mm,
Speeds Infinitely Variable 80 TO 500 rpm,
Axial Feeds 0.39878 - 4.90 mm Rev./Per Min,
Radial Feeds 0.198 - 2.448 mm Rev./Per Min,
Tangential Feeds 0.16764 - 2.09804 mm Rev./Per Min
Floor Space Required 2845 x 1803 x 1803 mm,
Machine Weight 13,200 lbs.
Machine is capable of doing high helix angle gears.
Good Condition Photo
254 MA18663 WMW Modul ZFWZ630 Face 305 mm,
Maximum Pitch Diameter 635 mm,
Equipped With :
Differential Hob Shift Hob Arbors
Very large selection of change gears -extra tooling.
Good Condition Photo
255 MA18662 WMW Modul ZFWZ800/3 max. wheel diameter-800 mm, gear width-410 mm, max. module -10, min. module 3, wheel diameter with counterstay -500 mm, table surface area- 700 mm, diameter of hob -195 mm, width of hob -220 mm, feeds - milling head 22n: 40-280 mm/WZ, turning speed range 40 - 280 U/min, max. helix angle -45 °, electrics - voltage /frequency 380/50 V/Hz, total power requirement 24 Kw, weight of the machine ca. 7,5 t, dimensions of the machine ca. 3,8 x 1,6 x 2,3 m 1972 Very good condition Photo
256 MA18660 Liebherr 252 Workpiece diameter 250 mm (max),
Possible module in steel 4.2 DP,
Hob diameter: 145 mm,
Hob length : 200 mm,
Hob speeds 1)cont. var. 60..360 - 80-480rpm,
alternative 100...600 - 120-720rpm,
Axial feed, continuously variable 1): 004-0.3ipr,
Radial feed, continuously variable : 027-0.55ipm,
Length x Width x Height : 3284 x 2299 x 2100 mm,
Weight of standard machine 9,920 lbs.
Equipped With :
Crowning Double Cut Chip Conveyor,
Differential Power Clamp Manuals,
Coolant System Infeed Tail stock with center,
Change Gears Work Light 1-1/4 Arbor.
Good Condition Photo
257 MA18657 Liebherr L400 max. wheel diameter -400 mm, gear width-300 mm, max. module -8, milling head speed -40-240 U/min, feeds- 0,1-200 hor. mm/WU, feeds- 0,3-4,8 vert. mm/WU, electrics - voltage/frequency- 380/50 V/Hz, total power requirement -16 Kw, weight of the machine ca. 6,8 t, dimensions of the machine ca. 3,4x1,9x2,3 m. 1964 Good Condition Photo
258 MA18655 Liebherr L301 Maximum Work Diameter-295 mm, Coarsest Pitch-4.25 DP, Maximum Axial Travel-218 mm, Minimum Number of Teeth-6, Diameter of Worktable-309 mm, Diameter Index of Worm Wheel-325 mm, Diameter of Center Bore in Table-78 mm, Distance, CL of Hole to Work Arbor-218 mm, Maximum Diameter/Length of Hob-137/150 mm, Maximum Shifting Travel-675 mm. 1974 Good Condition Photo
259 MA18644 Russian 5355B Table diameter : 4000mm, Table hole : 800 mm, Max. workpiece diameter : 8000 mm, Min. workpiece diameter : 500 mm, Max. workpiece weight : 60 t, Max. width of wheel : 2000 mm, Max. module: 75, Accuracy class:H Spindle cone: Metric 100 Max. diameter of mill:400mm Max. length of mill:500mm Max. travel:2380mm(93.7") Distance between table and mill axis: Min:500mm, Max:4250mm Distance between table surface and mill axis: Min:820mm Max:3200mm, Machine weight:192 t 1972 Good Condition Photo
260 MA18643 Pfauter,German P400 max. wheel dia. : 400 mm,
max. module : 8 mm,
spindle admission : 450 mm,
spindle numbers of revolution: 80-480 U/min,
feed motions : 20 - 230 m/mins,
milling length : 160 mm,
tangential stroke : 126 mm,
1 complete set of change gears,
7 spindle adapter : MKIV,
1 replacement gear belt,
motor : 380 V 50 Hz 14 kW,
Dimensions : 2300 x 1500 x 2100 mm,
weight : 6200 kg.
1976 Good Condition Photo
261 MA18564 Pfauter,German 1800/2200 with tangential head, without tailstock Very good condition Photo
262 MA18539 Russian 5342 Table Dia - 1800 mm, Machine weight - 28 Tons, Max. workpiece dia - 2600 mm, Max. Module - 25 mm, Vertical Movement of hob head - 1400 mm, Fitter with Gear Holding Mandrel & Center, Change Gears, APP 100 NO, 4 NO Cast Iron Support for job holding, 2 no small mandrel, 4 no Arbour support lying on table.  1974 Under power Photo
263 MA18468 Tos Czech FO10 Module maximum 10

Diameter work piece 1000 mm. max Height 400mm

weight of machine 9360 kg. Complete Set of change gears and Arbors

Good condition,under power Photo
264 MA18460 Gleason USA 125GH Nominal Workpiece Diameter-125 mm, Maximum Dia Pitch (coarsest)-3.2 module, Distance Between Work Spindle And Tailstock: Spindle Faces: Minimum/Maximum-252 - 473 mm, Maximum Hob Diameter-115 mm, Hob Lengths Up To-215 mm, Hob Arbor Diameter (optional)-22,27,32,40mm, Tangential Slide Travel (hob shift)-200 mm, Hob Speed Range-150-1500 rpm, Workspindle Speed-5-250 rpm, Floor Space-2578x1650x3117 mm, Net Weight- 6820 kg. Reconditioned 2007 Good Condition Photo
265 MA18332 Lorenz E18 Max. dia. of gear 1220mm,max. hob 184mm,max.D.P. hob 2,max. hob travel 571.5mm(index and differ gears., table dia. 812mm,table bore dia. 133.35mm,Electricals 240V,Dimensions of machine 1828mm x 3350mm x 2133mm,Wt. of machine 17 tons approx. Photo
266 MA18287 Kolomna Russia 5342 Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons. 1959 Good Condition Photo
267 MA18275 Russian 546M Work piece dia 2250-5000 mm,
Max. module of the wheels 16 mm,
Number of cogs 120-800,
Table dia 3800 mm,
Distance between the table and the mill axis 550-950 mm,
Max. table load capacity 40 tons,
Cutting accuracy - Fpr - 2,5 fur - 0,6-0,7,
The machine weight 75,1 tons,
Gear hobbing master-machine for finshing worm-wheels of the high accuracy.
1982 Good Condition Photo
268 MA18247 Russian 5K328A dia with support 850mm,

dia without support 1350mm,

Max. Module 12mm,

Max. face width of spur gear 560mm,

Min. number of teeth machined 20mm,

Max. mass if gear blank machined 2000 kg,
,
Table working surface 935mm,

Main Motor 10 kW,

Dimensions: 3560 x 1760 x 2590mm,

Total weight 14 tons - 3 machines

1980 Good Condition Photo
269 MA18148 WMW Modul ZFWZ1250/3 Max. dia : 1250 mm, Gear Width : 600 mm, Max. module : 14, With Change gears. Good Condition Photo
270 MA18127 Russian 53A11 Maximum dia of gears to be machined :
without support 1250 mm,
with support 800 mm,
Maximum module of gears to be cut 16 mm,
Min. number of teeth to be cut 12 ,
Diameter of table1000 mm , Maximum tooth inclination angle of gears to be hobbed, deg. +-/45 ,
Distance between the axes of table and hob 100-750 mm,
Distance from table plane to hob axis 235-835 mm,
Max. dimensions of hob to be set ::
length 250 mm,
diameter 225 mm,
Maximum length of hob slide vertical travel 650 mm ,Hob slide hole cone ( Morse) 6 ,
Max. axial hob travel length 245 mm,
Hob slide rotation speed 28-270 rev/min,
Feed , mm/min:
vertical (0,15-40)* ,
radial (0,06-17,2)* ,
tangential (0,04-19,2)* ,
Main motor power 13/15 kW,
Overall machine dimensions: 4020 x 2350 x 2780 mm ,

Mass of the machine 17.9 tons.
1990 Very good condition Photo
271 MA18045 Chinese Y31200E dia. 2.000,max modul 20 Good Condition Photo
272 MA17996 KOMSOMOLETZ 5327 Work piece diameter 1000 mm, Module 12, Faceplate diameter 700 mm, 5327 - cutter's DxL 225x240 mm.
1962 Complete,working condition Photo
273 MA17979 Tos Czech FO25 Max modul 25 Max dia of the gear 3000mm Specification Max modul
25 Max dia of the gear 3000mm Max dia of the gear with outboard support
1300mm Distance between axis of a spindle and camping arbor 80-1630mm Max
dia of the gear by tangencial method 10 grades 2400/800mm Max dia of the
gear by tangencial method 60 grades 500/700mm Max number of teeth with
standard change gears 448 Max face over 1500mm dia of the gear 800mm Max
face under 1500mm dia of the gear 750mm Max hob dia 340mm Max hob length
500mm Revolutions steps 8 Revolution of hob per min 12,5-63 Table surface
dia (basic) 1500mm Table surface dia (additional) 2500mm The main motor
power 14kW

Accessories Standard milling head, tangencial milling head, set of change
gears, set of arbors, support of a gear (shoes) 8 pcs, extra table 2500mm. No Tailstock.
1951 repair 1965 Very good condition Photo
274 MA17975 Russian 53A11 Maximum dia of gears to be machined :
without support 1250 mm,
with support 800 mm,
Maximum module of gears to be cut 16 mm,
Min. number of teeth to be cut 12 ,
Diameter of table1000 mm , Maximum tooth inclination angle of gears to be hobbed, deg. +-/45 ,
Distance between the axes of table and hob 100-750 mm,
Distance from table plane to hob axis 235-835 mm,
Max. dimensions of hob to be set ::
length 250 mm,
diameter 225 mm,
Maximum length of hob slide vertical travel 650 mm ,Hob slide hole cone ( Morse) 6 ,
Max. axial hob travel length 245 mm,
Hob slide rotation speed 28-270 rev/min,
Feed , mm/min:
vertical (0,15-40)* ,
radial (0,06-17,2)* ,
tangential (0,04-19,2)* ,
Main motor power 13/15 kW,
Overall machine dimensions: 4020 x 2350 x 2780 mm ,

Mass of the machine 17.9 tons.
1990 Very good condition Photo
275 MA17969 Seiwa MH3DS max dia 250 mm, module 2, Auto cycle type. Good Condition Photo
276 MA17964 Liebherr LC502 max working dia 500 mm, max modul 10. 1990 Good Condition Photo
277 MA17963 Liebherr LC252 max working dia 250 mm, max modul 6. 1995 Good Condition Photo
278 MA17962 Liebherr LC122 max working dia 125 mm, max modul 3. 1998 Good Condition Photo
279 MA17944 Pfauter,German RS3V max. wheel diameter 1800 mm,
gear width 600 mm,
max. module 15,
min./max. milling cutter dia. 210 mm,
cutter width - max. 260 mm,
milling slide swivelling 180 Grad,
milling spindle turning speeds 30 - 120 U/min,
table hole 160 mm,
table diameter 840 mm,
draw-in arbor diameter 60 mm,
total power requirement 14,4 kW,
weight of the machine ca. 12700 kg,
base area 2978 x 890 mm2,
dimensions of the machine ca. 3,81 x 2,23 x 2,70 m
Very good condition Photo
280 MA17943 Cugir,Romania FD900 max. machining dia. 900mm
max. machining dia. without small column 1000mm
max. module 12mm
min. teeth no. 10
table dia. 820mm
axial travel of milling cutter 450mm
milling cutter vertical travel 200mm
milling cutter sizes (dia.x length) 190 x 210 mm
milling cutter max. helix angle +/- 45 degree

main spindle taper -Morse 5
Machine weight 12,5 tons
overhauled 2009 overhauled Photo
281 MA17905 Russian 5A342 Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons. 1968 Very good condition,Under power Photo
282 MA17894 Chinese Y31200C Max workpiece dia (with rear column)- 1600mm, (without rear column)- 2000 mm, Min workpiece dia- 130 mm, Max workpiece width- 1200 mm, Max helix angle- 45 degrees, Max machine module: 1.Hobbing cutter: Steel- 24, Cast Iron- 24. 2.End Milling cutter:Steel-36, Cast iron-36. 3.Disc milling cutter: Steel-30, Cast iron-30, Hobbing cutter: Dia:310mm, Length-400 mm, Max vertical travel-1200 mm, Distance from hob head center to table plane center: Max-1175 mm, Min-100 mm, Dia of table- 1800 mm, Feed: Dia of table- 1800 mm, Total power- 25.3 kw, Length- 7920 mm, Width-2550 mm, Height-3700 mm, Weight of the machine- 33. When single indexing is processed, cycle machining can be realized automatically by using the end milling cutter and disc milling cutter. Single indexing also can be controlled manually independently. The accuracy is not less than 7 grade with gear hobbing process and 8 grade with single gear indexing. The table is centralized by hydrostatic bearing. Pressure oil is supplied through gear oil divider. The double pitch worms are used for machine. Without adjusting in radial the machine good mating condition can be achieved. The single worm transmitting is used for Y31800C machine and machines whose Dia. is larger than 8 metres and two meshed adjustable washers are worm transmitting is used for Y31800C machine and machines whose dia. is larger than 8 metres and two meshed adjustable washers are adopted. Main motor is DC motor with Britain CT speed regulation system. The machine is controlled by programmable controller and make all automatic cycling process variable and reliable.Tangential toolhead, internal end milling head, end milling head rear column. Good Condition Photo
283 MA17877 Pfauter,German RS3 max. wheel diameter 1800 mm,
gear width 600 mm,
max. module 15,
min. module 1,
wheel diameter with counterstay 800 mm,
turning speeds 29,35,43,52,63,76,9U3,/1m1i4n,
table diameter 970 mm,
1 Pos.,
table longitudinal travel 1020 mm,
total power requirement 7 kW,
weight of the machine 8,5 tons.
Good Condition Photo
284 MA17869 WMW Modul ZFWZ1250 Max. wheel diameter 1250mm ,
Gear width 600 mm ,
Max. module 14 ,
Min. module 2 ,
Diameter of hob 240 mm ,
Table surface area 1020 mm ,
Turning speed range 28-200 U/min ,
Feeds - axial 0,28 - 8 mm/min ,
Feeds - radial 0,1 - 2 mm/min ,
Feeds - tangential 0,16 - 4 mm/min ,
Support swivability left/right: +/- 45' ,
Electrics - voltage/frequency: 380/50 V/Hz ,
Total power requirement 25 kW ,
Weight of the machine ca 16 t,
Dimensions of the machine ca 4500 x 2100 x 3300 mm.
With Small Gear Hobber of Pfauter make.
can be inspected under power Photo
285 MA17841 Tanaga Max. working diameter 2500 mm
Table diameter 1600 mm
Max. module 20
Good Condition Photo
286 MA17822 Shibaura Max. Wheel Dia 2400 mm,
Min. Wheel Dia 300 mm,
Module 30,
Max. Gear Width 1000 mm,
Table Size 1700 mm

Good Condition Photo
287 MA17739 Russian 5342 Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons. 1975 Very good condition Photo
288 MA17618 Cugir,Romania FD320 Max. dia. 320mm,minimum module 6,axel travel 280mm,tangential travel 100mm,with acessories change gears, instlled power 5.5 kW,wt.of machine 4.8 tons approx,overall dimensions (LXWLH)2382x1046x1850mm) 1976 Photo
289 MA17617 Cugir,Romania FD800 Max. dia.800mm,max. module 10,max. stroke of the axial feed 450mm,max. no. of teeth 10,table dia. 800mm, milling spindlecone MORSE 6,distance between piece and tool, min 90mmmax.500mm,with accesories change gears, cooling tank,voltage/frequency 330V/50Hz,installed power 13.3 kW,net weoght of machine 12 tions approx.,dimension of machine (LXWXH) 3070 x 1870 x 2355mm 1981 Photo
290 MA17597 WMW Modul ZFWZ3000 x 30 Working dia : 3000 mm, Max. Module : 30 mm 1953 Good working condition Photo
291 MA17589 Pfauter,German Table Size : 900 mm,
With change gears and accesories.
1936 Good Condition Photo
292 MA17588 Modul ZFWZ250x5N Table Size : 250 mm,
Max. module : 8,
With changde gears and accesories.
1967 Good Condition Photo
293 MA17587 Pfauter,German RS1 Table Size : 500 mm,
Max. module : 8,
With changde gears and accesories.
1954 Good Condition Photo
294 MA17565 Jegorjevsk,Russia EZS320 Max dia 1250 mm,
Modul 16.

1981 Good Condition ,Not under power Photo
295 MA17556 WMW Modul ZFWZ800 x 10/II

Max. workpiece diameter by high capacity: 800 mm
Max. milling diameter of workpiece: 500 mm
Max. way of tangential feed: 150 mm
Max. way of axialfeed: 410 mm
Max. angle of tooth lean: 45 degree
Min. hobing number of teeths(normal): 12
Min. hobing number of teeths(special): 6
Max. module (gear milling): 10 mm
Max. hobing diameter: 195 mm
Max. hobing length: 220 mm
Table grip surface diameter: 700 mm
Table centering diameter: 200 mm H7
Table centering depth: 50 mm
Distance between mill center and table grip surface
Min.: 195 mm/ Max.: 605 mm
Distance between mill center and table center
Min.: 80 mm/ Max.: 540 mm



1976 Very good condition Photo
296 MA17554 Russian 5A342 Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons, complete with Internal cutting attachment. Very good condition Photo
297 MA17553 Russian 5K328 Max diameter: with counterbeam 500 mm, Without counterbeam 800 mm, Max modul 10, Table: 630 mm, weight 7200 kg - 8 machines. 1970 Good Condition Photo
298 MA17504 Russian 5A342P Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons. 1977 Complete ,good working condition Photo
299 MA17498 WMW ZFWZ03 Max. module:
- for plain milling cutters 8,
- for forming cutters 14,
Max. diameter of gear 250 mm,
Max. axial travel 280 mm,
Max. tangential (milling) travel 160 mm,
Max. angle of teeth incline 45°,
Diameter of clamping surface of table 295 mm,
Max. diameter of milling cutter 160 mm,
Max. length of milling cutter 200 mm,
Distance between clamping surface of table
and center of milling cutter 190-470 mm,
Cutter revolutions 50-400 rpm,
Rapid traverses:
- axial 1600 mm/min,
- tangential 800 mm/min,
- radial 2000 mm/min,
Machine dimensions 3930 x 3460 x 2500 mm,
Machine weight cca 8500 kg.
Good Condition Photo
300 MA17496 Liebherr L402 Max. Dia 400mm, Module 8 1982 Good Condition Photo
301 MA17466 WMW,Germany ZFWZ1500x15 Table dia : 800 mm, Max dia. : 1500 mm, Stroke of hobbing head : 400 mm, Module 15. 1959 Very good condition Photo
302 MA17455 Tos Czech FO6 Module 6,

Table size 420 mm,
Max whell diameter 800 mm,
Weight 4 tons.
1961 Good Condition Photo
303 MA17450 Pfauter-Kapp RA300 Max. module 8,
Max. diameter of gear 350 mm,
Max. width of gear 250 mm,
Spindle input 15 kW,
Total input 35,6 kVA,
Machine dimensions 4000 x 2200 x 1900 mm,
Machine weight 8 000 kg.
1974/1993 Good Condition Photo
304 MA17448 Tos Czech OFA32A Max. module 7,
Max. diameter of gear 320 mm,
Vertical adjustment of tool 250 mm,
Max. weight of workpiece 250 kg,
Max. angle of teeth incline +-45°,
Min./max. number of teeth 9/200,
Total input 18,5 kVA,
Machine dimensions 2460 x 1910 x 1820 mm,
Weight 5500 kg.
Good Condition Photo
305 MA17387 IUG Craiova,Romania FD3600 Max machining dia 3500 mm,

Min machining diameter 550 mm,

Max load on the table 25000 kg,

Max module 30/40 mm,

Machined teeth number 30 - 540,

Hob max size dia 350x400 mm,

Installed power 48 kW,

Total weight 40 tons,
Accessories:

gear shaping device;

tool clamping(fixing) device;

change gears

Good condition,under power Photo
306 MA17357 Koepfer 170 max.length to mill 150mm,Module 2.5,min nr of milling gears:n.6,min distance between principal spindle and half of milling cutter60mm,Vise cone: 5,collet clamping,clamping range:3-24,normal dia. of spindle mill holder:13+16mm,max.dia of milling cutter 63mm,max. thickness of milling cutter:with normal spindle 31mm,with moving spindle 46mm,max. moving of milling cutter with normal spindle 20mm,with moving spindle 30mm,Feeding speed of milling cutter from 100 to 700 rpm:9,Longitudinal feeds from 0.04 to 1.6mm per min. 9,vertical feeds from 0.06 to 1.6mm per round:8,dimensions of machine 400x850x1550mm,Wt. of machine 2.2 tons approx. Photo
307 MA17328 Russian 5327 dia 1000 mm, modul 12 . 1957 Good Condition Photo
308 MA17235 Tos Czech 1. Gear Hobber - Model : FO10 -
Maximum module 10 mm, Maximum diameter without counterbeam 1000 mm, Maximum diameter with counterbeam 750 mm, Table diameter 850 mm, Minimum / Maximum height of the cutter from the table 280 MM / 740 mm, Maximum width of tooth 400 mm, Hole in table 100 mm, Milling spindle cone 150 Vertical feed 0,2 - 6,00 mm, Longitudinal feed 0,050 - 1,50 mm, Tangential feed 0,133 - 4,0 mm, Main motor power 10 kW Machine weight 9,4 tons, Required space 3120 x 1840 mm.
2. Gear Hobber - Model : FO6 -
Max. diameter of milled wheel 800 mm Max. milled modul 6 . Main motor output 3.7 kW Dimensions 2540x1400 mm Machine weight 4 tons.
Good Condition Photo
309 MA17203 Russian 5A342 Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons. Very good condition Photo
310 MA17136 Russian 5A342P Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons. 2008 New Photo
311 MA16999 Tos Czech FO6 table dia 412.5 mm , 10 HP , 600 mm dia cap , 800 mm without tailstock , upto 190 RPM . Good Condition Photo
312 MA16871 Donini,Italy table size 1800 mm, swing dia 2000 mm, module 20DP, w/height 600 mm, weight 17 tons approx, with tailstock and necessary accesories. 1986 Good Condition Photo
313 MA16863 WMW Modul ZFWZ250/3 Dia. of workpiece 250mm,module6,max.axial feeding travel 275mm,max. tangential feeding travel 275mm,tangetial feeding travel(hob shift)100mm,helix angle 45dgree,no. of teeth cut:8,no.of teeth cut using the indexing:4,workpiece dimensions-max. hob dia.145mm,hob length 170mm,dia. of tightening surface of a table 275mm,dia.of centering element of a table 200mm,depth of a centering element of a table 75mm,distance from the hob center to surface of work table min.195mm,max.470mm,distance from hob center to the center of work table min.20mm,max.230mm,cone of hobbing 45,hob speed 50-200 rev/min.,hob speed variable in 2 ranges:125-400 rev/min,main motor 7.5kW,poer consumption 20kW,50Hz 380V,machine dimension-3000x3475x2200mm,Wt.of machine-5.5 tons.(2 machines) 1974 Good Condition Photo
314 MA16711 Kolomna Russia 5363 Max diameter of detail - 3200 mm,
Min diameter of detail - 800 mm,
Max width of detail - 1600 mm,
Max detail's weight - 25000 kg.

1965 Working Photo
315 MA16658 Russian 5342 Diameters of machined gears max 2000 mm, Maximum length of machined gears, 700 mm, Module of machined gears 25 mm- cast iron)

Technical condition -excellent
Retrofitted with new electric system in 2008

with change gear set, arbours & cutter.
With backcolumn
Detailed machine tool Description
Table diameter, mm 1750
Maximum hob dimensions (diameter x length), mm 250x300
Number of hob spindle speeds 20
Hob spindle rotation frequency, rpm 11.2-100
Main drive power, kW 14
Rapid travel power, kW 4.5
Overall dimensions, mm 5916x2876x 3250
Weight, kg 24000

ACCESSORIES:
Many Change Gears
Internal gear cutter
Support - various
Manuals
1967 Good Condition Photo
316 MA16651 Russian 5342 Diameters of machined gears max 2000 mm, Maximum length of machined gears, 700 mm, Module of machined gears 25 mm- cast iron)

Technical condition -excellent
Retrofitted with new electric system in 2008

with change gear set, arbours & cutter.
With backcolumn
Detailed machine tool Description
Table diameter, mm 1750
Maximum hob dimensions (diameter x length), mm 250x300
Number of hob spindle speeds 20
Hob spindle rotation frequency, rpm 11.2-100
Main drive power, kW 14
Rapid travel power, kW 4.5
Overall dimensions, mm 5916x2876x 3250
Weight 24 tons

ACCESSORIES:
Many Change Gears
Internal gear cutter
Support - various
Manuals
1970/2008 Excellent,Fully reconditioned Photo
317 MA16569 Tos Czech OFA71A Max. geardia. 710mm,Modul 10,mostly for bronze worm gears, with change gears,tangential head,with chip conveyor. new in 1985/1986 good working,little used Photo
318 MA16521 Russian 5A342P Dia of ext mesh gear machined 300 - 2000 mm, Module 20 - 25, length 560 - 760, helix angle 45 deg,work carrying capacity 10 tons Dia of table working surface 1800 mm ,range of distances betn table surface and milling spindle axis 580 - 1390 mm, number of milling spindle rotation freq 23, Power of motor 22 kw, machine weight 32 tons . 1986 Complete ,good working condition Photo
319 MA16506 Russian 546M Work piece dia 2250-5000 mm,
Max. module of the wheels 16 mm,
Number of cogs 120-800,
Table dia 3800 mm,
Distance between the table and the mill axis 550-950 mm,
Max. table load capacity 40 tons,
Cutting accuracy - Fpr - 2,5 fur - 0,6-0,7,
The machine weight 75,1 tons,
Gear hobbing master-machine for finshing worm-wheels of the high accuracy.
1968 Good Condition Photo
320 MA16094 Pfauter,German P900 Gear Diameter Maximum 900 mm
Face Width - Maximum 500 mm
Module - Maximum 10 Mod
Number of Teeth (Single Start) - Minimum 8
Number of Teeth (Double Start) - Minimum 4
Distance Table to Outer Steady
Maximum 910 mm
Minimum 465 mm
Distance Table to Hob Spindle
Maximum 550 mm
Minimum 50 mm
Hob Diameter - Maximum 192 mm
Hob Width - Maximum 220 mm
Cone of Hob Arbor MK 5
Hob Shifting - Maximum 200 mm
Diameter of Table 698 mm
Diameter of Table Bore 160 mm
Hob Speeds, Infinitely Variable 60 - 300 RPM
Feeds Axial : 0, 40-6, 3 mm/rev
Radial 0, 1-1, 60 mm/rev
Tangential 0, 14-2, 24 mm
Voltage 380/3/50
Main Drive Motor 11 kw
Total Power Required 20 kva
Approximate Weight 8.5ton (18,743 Lbs.)

Good Condition Photo
321 MA16091 Cugir,Romania FD1250 Max. working diameter-with tailstock 1250 mm
Without tailstock 1500 mm
Max. module 16
Max. stroke 650mm
Axial travel of milling head 600 mm
Main motor power 15 kw
Overall dimensions 4775 x 3100 x 3390 mm
weight-aprox 20.5 tons.

The machine was retrofitted with new electric system in 2008.
The machine was overhauled partly.
1976 / 2008 Good Condition Photo
322 MA15234 Russian 5K32P max wheel diam - 800 mm,
gear width -350 mm,
max module -10,
dimensions 2650 x1450 x 2000 mm,
weight 7200 kg.
Good Condition Photo
323 MA15233 Russian 5K32 max wheel diam - 800 mm,
gear width -350 mm,
max module -10,
dimensions 2650 x 1450 x 2000 mm,
weight 7200 kg.
Good Condition Photo
324 MA15232 Cugir,Romania FD800 Max. Dia. 800 mm,
Max. module of teeth 10,
Axial travel of miling head 450 mm,
Min. number of teeth 8.
Good Condition Photo
325 MA15180 Russian 5K328A dia with support 850mm,dia without support 1350mm,Max. Module 12mm,Max. face width of spur gear 560mm,Min. number of teeth machined 20mm,Max. mass if gear blank machined 2000 kg,Table working surface 935mm,Main Motor 10 kW,Overall Dimensions 3560 x 1790 x 2590 mm,Weight 14 tons 1971 Good Condition Photo
326 MA15045 Chinese Y3180K Maxwork plece dia.(wiht/without work stay)620/800mm
Max.module(steel/cast iron)8/10mm
Max.width of teeth 300 mm
Max.hob diameter.length180/175mm
Dia.of worktable 625mm
Spindle speed/steps 40-250rpm/9
Max.hob shift axial 55mm
Main motor 5.5kw/1500rpm
Taper of hob arbor fitting Morse 5
Distance between hob axis and worktable surface 240-590mm
center distance between hob and worktable surtace 400-720mm
Distance between tailstock end face and worktable surface 400-720mm
Worktable bore diameter 80 mm
Max.hob swiveling angle 240°
Dia.of hob arbors dia 22.27.32.40mm
Work arbor dia 35 mm
Overall dimensions 2600×1400×1940mm
Gross weight /Net weight 6300kg/5700kg
Accessories and tools hob arbor addembliesφ22.φ27.φ32.φ40one for each;a complete set of change gears;tools, The machine is suitable for large batch and single production of cylindrical spur and helical gears,worm gears and sprocket.
The machine is characteriaed by good rigidity, high working accuracy,easy in operation and maintain.
The machine can be operated not only with forward and backward cutting,but also with axical or radial feed.
The machine can be equipped with simens CNC system according to use's request to cut crown and slightly tapered gears.

Brand New Photo
327 MA15044 Chinese Y3150K Max.workpiece dia 500 mm
Max.module 8 mm
Max.width of teeth 250 mm
Max.hob diameter/length160/160 mm
Dia of worktable 510 mm
Spindle speed/steps 40-250 rpm/ 9
Dia of hob arbors22.27.32.40 mm
work arbor 30mm
Max .hob shift axial 55 mm
Main motor 5.5kw/1500rpm
Overall dimensions 2450×1272×1790mm
Taper of hob arbor fitting Morse No.5
Distance between hob axis and worktable surface 235-535mm
center distance between hob and worktable 20-330mm
Distance between tailstock end face and woektable surface 380-850mm
Worktable bore diameter 80 mm
Max.hob swiveling angle 240°, The machine is suitable for large batch and single production of cylindrical spur and helical gears,worm gears and sprocker.
The machine is characteriaed by good rigidity,high working accuracy, easy in operation and maintain.
The machine can be operated not only with forward and backward cutting ,but also with axical or radial feed.
The machine can be equipped with simens CNC system according to user's request to cut crown and slightly tapered gears.

Brand New Photo
328 MA14930 Kolomna Russia 546 Processing diameter:2250-5000 mm, Module: 16, Number of teeth: 120-800, Max mill diameter: 320 mm, Table diameter: 3800 mm, Distance between mill and table's axis: 1150-2700mm, Frequency of mill rotation: 5,6-46rev/min, Number of mill speeds: 10, Radial feeding for one table turning: 0.093-3.1 mm/rev, Number of feedings: 16, Motor: 14 kV, Max table's load capacity: 40000 kg, Measurements: 8510*4390*3100 mm, Weight: 75050 kg. 1976 Good Condition Photo
329 MA14929 Kolomna Russia 544M Processing diameter: 500-2500 mm, Module: 10, Number of teeth: 90-500, Max mill diameter: 320 mm, Table diameter: 2500 mm, Distance between mill and table's axis: 300-1500 mm, Frequency of mill rotation: 6-30 rev/min, Number of mill speeds: 10, Radial feeding for one table turning: 0.066-2.2 mm/rev, Number of feedings: 16, Motor: 15 kV, Max table's load capacity: 10000 kg, Measurements: 6952*3300*3100 mm, Weight: 51000 kg. 1974 Good Condition Photo
330 MA14200 Muir 228 Max workpiece diameter.(30ft) 9144mm,
Max face width (7ft)2133mm,
Table diameter. (9ft) 2743mm,
Hob feeds.(6)0.048ins-0.116ins,
Hob speeds variable - DC Drive,
Max Hob size 250 mm(10") dia. x 225 mm(9") long,
Hob shift manual,
Main motor x 2 - 15 HP Each.
Electrics:400-440-3-50,
Complete With:
Power rotary table
Spiralling ratio.
Prime gears.
Compensation gear.
Hob arbor.
Power to hob Swivel,
Change gears.
Coolant.
Imperial machine,
Electrics 400/440, 3, 50,
Approximate Dimensions: 40' Long x 14' Deep x 18' High.

Early 1970''''s Good Condition Photo
331 MA14124 IUG Craiova,Romania FD3600 Gear Diameter 3600 mm,
Min. Gear Diameter 690 mm,
Max. Module (max 3000 mm Gear Dia) 30 MOD,
Max. Module (3000-3500 mm Gear Dia) 25 MOD,
Min. Number of Teeth 30,
Max. Number of Teeth 540,
Max. Distance between centerline of Cutter and Work 2000 mm,
Radial Feed .13 to 2.8 mm/rev,
Axial Feed .34 to 7.5 mm/rev,
Max. Diameter and Length of Cutter 350 mm x 400 mm,
RPM of Hob 5-60,
Hob Swivel - 45,
Max. Vertical Travel 1000 mm,
Diameter of Table 1900 mm,
Max. Workpiece Weight 25,000 kgf,
Capacity of Main Motor 15 Kw,
Power Capacity in Total, 380V, 3 Phase - approx. 70 Kw,
Space Required (L x W x H) 16,400 x 5,000 x 3,650,
Weight of Machine, Approx. 52 Tons.
1985 Good Condition Photo
332 MA12592 Pfauter,German P400 dia 400 mm,

Module 8 mm,

Max height 310 mm,

Weight 6.5 tons.



1977 Complete,very good condition Photo
333 MA9378 Liebherr L402 Workpiece dia with hob dia 188-394 mm, max. workpiece dia with hob dia 100-483 mm,max. pitch 2.5 DP,hob slide travel 295mm, work table dia 413mm, pitch dia 398mm, table bore dia 98.4 mm,min. distance between hob & table centre 29.5 mm,max. distance between hob & table centre 295.25 mm,max. hob dimensions:dia 189 mm, max. hob dimensions:length 246 mm,max. hob shift travel 196.75 mm, hob spindle speed ranges 60-480 RPM, machine weight 21 tons, differential extra gear, hob shift, extra tooling, push button controls 220 or 440/3 Phase AC Motor. 1976 Photo
334 MA7378 Russian 53B05PB 10 machines 2000 New Photo
335 MA7233 Russian 53B05PB 2004 New Photo
336 MA5516 Chinese Y31200E dia 2000mm, modul 20 1986 New ,Unused Photo
337 MA37 L301 dia. 300mm, modul 6, no of tooth 3, Work table dia 315mm, Table bore 80mm, Min. dist. between hob and table center 25mm, Max. dist. Between hob and table center 225 mm, Clamping height above worktable 165 mm, Marking arbor taper Morse 4 1972 Photo
338 MA2942 53A11 Semi-automatic Gear Milling Machine, degree of accuracy of processing on control wheel Z 81, module of grinding gera 14mm, dia of processable gears 1250mm, with a supporting support (countersupport) 800, no of gear tooth 16, dia of installed worm mills 22 Photo



G-59/60, E Block, Simla House, Nepean Sea Road, Mumbai 400036. India.
Phone : +91-22-66644462 /63 /69     Fax : +91-22-23690034
E-mail : info@nvmachinery.com / info@machineworld.in